gatnerd

Military Guns and Ammunition

Hosted by gatnerd

This is intended for people interested in the subject of military guns and their ammunition, with emphasis on automatic weapons.

  • 3271
    MEMBERS
  • 185619
    MESSAGES
  • 4
    POSTS TODAY

Discussions

NGSW Phase 2 Consolidation and info   Small Arms <20mm

Started 30/8/19 by gatnerd; 282751 views.
smg762

From: smg762

23-Sep

Quick question about the textron 6.8.... am i to understand that only CT rounds can use compressed propellant?

Or could it be used elsewhere -for example- to reduce the size of a 556 round?

And can compressed propellant be combined with high case pressures?

Thanks

renatohm

From: renatohm

23-Sep

5.7x28 is bottleneck.

gatnerd

From: gatnerd

24-Sep

Does being a bottleneck have any real effect on feeding reliability when we're talking about pointy, Spitzer projectiles? 

I'd get the benefit for pistol rounds (.357 sig vs .40 using flat tip JHP) but for spitzer, the pointy tip is so much smaller then even a narrow .224 opening that I imagine bottleneck is pretty irrelevant. 

gatnerd

From: gatnerd

24-Sep

Mr. T (MrT4) said:

Elcan being free of ITAR will c

Is that smart optic you're showing the new 'Smart ELCAN?' I had heard they were working on one but have never seen any specs or news on the project since.

roguetechie

From: roguetechie

24-Sep

Technically you can use compressed propellant in anything so long as you're using the right propellants.

Yes it's also compatible with High pressure though it's best to keep in mind that the higher you run your pressures the more similarity your cartridge has to a bomb if something goes wrong.

You definitely want to make sure that the guns action is rated to 25-50% more pressure than the peak pressure you want to run.

smg762

From: smg762

24-Sep

Going back to the safety aspect, if one had a TKB022 or steyr ACR with NGSW ammo, surely youd need a lot of steel round the chamber to protect from kabooms...

as for compressed powder, im surprised noone has tried to reduce 556 down to 5.7x28 size.

also the 4.6hk has 65k PSI as well.

I wonder if reverse feed guns like the PKM or boberg pistol could cope with ultra pressure ammo....in principle i mean

  • Edited 24 September 2021 15:56  by  smg762
roguetechie

From: roguetechie

25-Sep

Somebody has, and it's been posted in this thread!

Gatnerd showed the Knox engineering design. I'll repost just so you see.

As far as needing "lots of steel"... Not really.

You need to use very good steels and well optimized bolt head designs or etc.

smg762

From: smg762

25-Sep

Yeh i saw that but the document implies that its using an advanced propellant....they didnt mention compressed propellant.

 My new thought for reducing throat wear  (most of my pet projects are very overbore) is to cut the barrel in half...the first 6 inches is separate from the rest and the user can do a quick change...

Its like a m249 quick change exept your only swapping out the throat.

The round itself is a .23 caliber FABRL which is only 42grains but has 4900fps. Hence the concerns with throat wear. 

Apparently revolving chambers wouldnt help much so the only other approach is cool propellants

  • Edited 25 September 2021 13:27  by  smg762
EmericD

From: EmericD

26-Sep

If your goal is to achieve very high MV, why not going for a conical adapter or a "Gerlich" conical tube?

TOP