gatnerd

Military Guns and Ammunition

Hosted by gatnerd

This is intended for people interested in the subject of military guns and their ammunition, with emphasis on automatic weapons.

  • 3271
    MEMBERS
  • 185595
    MESSAGES
  • 13
    POSTS TODAY

Discussions

NGSW Phase 2 Consolidation and info   Small Arms <20mm

Started 30/8/19 by gatnerd; 281796 views.
poliorcetes

From: poliorcetes

27-Oct

Thank you, hombre!

135 gr, 3000 fps - 3600 J at the muzzle

and peak pressure of 65000 PSI, quite lower than the alternatives

roguetechie

From: roguetechie

27-Oct

A very important thing to note is that TV can absolutely ratchet the pressures up if necessary AND they're getting enough of an efficiency bump in a cartridge this size to potentially get a little more MV out of any given peak pressure.

These are both fairly significant factors in making TV case technology one of the safer bets.

They also have their case manufacturing technology streamlined enough to make scaling production doable in a short interval.

I'm not super sold on the Lonestar/GD rifle but everything else they have is damn tempting.

On the note of TV pushing the pressures up, the legacy 240's we have (and the Barrett LWS I'm not so sure on mk48/240L) already have bolts and carriers theoretically safe to damn near 100k psi.

With the wider economic and political situation the way it is, I'd almost be inclined to tell sig and TV to suck it up, take the best of both programs (IF we can physically make enough Delta p cans!), and dump a moderate amount of money turning legacy 240's etc into 6.8 slingers while also doing a pure fleet back end swap to 5.56 and 7.62 neckless in the legacy fleet for anything that really can't do the high pressures.

This buys us breathing room, time to spool up, and hopefully results in people not blowing up guns by trying to chamber hot shit in stuff it doesn't belong in.

If you really want to go full bonus points, make a new standard lightweight link pattern for all the conversion guns to eke out just a bit more weight savings and possibly some long term cost savings too.

There's a few different ways you could do this in stages to make the workload on depots armorers etc more manageable.

Another thing I'd probably look at doing is a new optic or two that aren't quite ngsw fc level complexity but do run digital reticle projection and a ballistic comp onboard or an easy interface to swap the reticles depending on the exact ammo being used.

stancrist

From: stancrist

27-Oct

gatnerd said:

Here we go, the whole article in full rez links that you can zoom in on:

Outstanding!  Thanks!

Interesting that it shows 50-rd capacity for the automatic rifle.  First time I've seen that anywhere.

So, does anyone have the September issue?  I'm wondering if it shows the weight of the SIG rifle?

gatnerd

From: gatnerd

27-Oct

A close up shot of TV's 6.8 NGSW 'Neckless' cartridge. I was really surprised by this - I figured there'd be a lot more internal neck/plastic supporting the bullet inside. But they have just a little, so really maximizing case capacity. 

This also gives us an idea of how Emeric's 5.56 Neckless might look in polymer using that Balle D projectile he developed. 

gatnerd

From: gatnerd

27-Oct

stancrist said:

So, does anyone have the September issue?  I'm wondering if it shows the weight of the SIG rifle?

I dont have the issue but its available from the same source I got this months digital G&A. Hopefully someone will snag it, as its apparently a '14 minute read' aka pretty indepth article on SIGs NGSW.

https://www.zinio.com/guns-ammo/console-32735-219406-i501475

Previously Soldier Systems had reported the weights for both:

https://soldiersystems.net/2019/05/23/sofic-19-sig-sauer-exhibits-next-gen-squad-weapons/

Gr1ff1th

From: Gr1ff1th

27-Oct

Yeah, It's already hitting 135gr @ 3000 FPS with 65KPSI, Imagine what it could do with the full 80KPSI out of a 22" Barrel, for applications like this the extra barrel length from a bullpup can be a huge boon, not so much with 5.56 IMO

Gr1ff1th

From: Gr1ff1th

28-Oct


For comparison the 6.5CT Carbine is 8.3 lb (According to Textron), however we have no concrete numbers yet on the Textron NGSW-R 

Msg 7519.1755 deleted
gatnerd

From: gatnerd

28-Oct

Ran the numbers; RM277 is still very heavy at 10.4lbs. 

TV RM277 weight analysis:

Troy 45 degree sights: 3.35oz

Manta Rail covers = 7g a piece; ~9 per rifle ( 9x7g=63g) 2.22oz

Lancer 20rd 7.62 mag = 6.4oz

Aimpoint CCO = 13.3oz

Brevis 7.62 Titanium suppressor = 10oz

Total = 35.27oz / 2.2 lbs

RM277 Tested = 12.6lbs

-Gear

RM277= 10.4lbs

K&M 17 .308 Bullpup = 8.2lbs 16”; 8.5lbs 20”

DT MDRX .308 = 8.7lbs 16”

Tavor 7 .308 = 9lbs 16.5”

RM277 6.8 = 10.4lbs 18.5”

That is just weirdly heavy. I imagine part of that is still being a prototype, plus having the extra complexity of the open bolt / close bolt firing ability. But still. Heavy. 

The slight wildcard in the analysis is the suppressor. I assumed the Titanium Brevis was used. However if it was Iconel one, which is 6oz, that would put the RM277 at 10lbs flat. Which is still heavy but would be less.

  • Edited 28 October 2021 2:12  by  gatnerd
gatnerd

From: gatnerd

28-Oct

Some notes from the article now that I've re-read it:

RM277 Rifle

-Tested model 18.5” barrel; ‘production model’ 20”

-32.25” long w/ suppressor w/ 18.5”

-Rifle ~1moa in testing; a few flyers outside of MOA due to meh trigger

-Tworx I-rail can share power and data to optics and accessories

-Can be fired in open and closed bolt configuration

Ammo

-Claim 6.8 TVC max velocity is classified (ie higher then 135gr @ 3000fps)

-G&A Tested ‘comercial load’

-Can use less powder bc less energy loss due to not heating chamber like brass

-TV tested 60 different St. Marks powders for optimal performance

-Makes clear that military version will NOT be 80kpsi so as to allow backwards compatibility with existing weapons

-6.8 TVC Commercial load @ 65kpsi is ‘lower pressure and velocity,’ ‘different internal case geometry’ then Gov’t load;

-6.8 TVC Commercial = 135gr @ 3000fps from test barrel of unknown length

-6.8 TVC Commercial load did 5 shot 0.23” group from Accuracy International AX rifle

.....

The ammo difference between Civilian and Military is a bit weird. They make it clear that the .Gov NGSW round isn't 80kpsi, as that would prevent backwards compatibility. Yet they mention twice that the .Gov round is hotter then the 65kpsi commercial version, and also uses a different powder and internal case dimension. 

.....

So best guess is the TV .Gov load is somewhere between 66kpsi and 79kpsi, with the velocity of the GP EPR projectile over 3000fps. 

  • Edited 28 October 2021 6:53  by  gatnerd
TOP