Military Guns and Ammunition

Hosted by gatnerd

This is intended for people interested in the subject of military guns and their ammunition, with emphasis on automatic weapons.

  • 3333
  • 189353
  • 12


20x102 mm cannons   Army Guns 20+mm

Started 22/10/21 by Guardsman26; 6248 views.

From: roguetechie


There's bore rider finned darts that have been done in tank guns but you still need a sabot for something like that to hold the pressure In so that doesn't actually fix the sabot safety situation.

Also what are you talking about wrt telescoping the sabot?

To make an apfsds dart that works you want the length to diameter ratio of the main body of the penetrator to be as good as possible think 25:1 or so ideally.

There's also the nontrivial problem of saboted anything being more expensive.

This is exactly why when you asked me what my ideal replacement 50 round and gun looked like "I cheated" by saying I'd make one of the main every day rounds for it pulled m8api rounds thrown in a new case with a sabot.

Because they already pay contractors to pull the m8api projectiles from existing non viable loaded ammo and load it in a brand new primed case with new powder.

Manufacturing TV 50 BMG replacement neckless cases and loading rounds into them would be cheaper take less manpower and floor space than what they're already doing.

This "buys me" enough man power man hours and machine time to make my saboted m8 API etc projectiles essentially cost neutral or possibly marginally cheaper in full rate production to come out at worst cost neutral on the vast majority of rounds the military would be loading and firing.

Considerations like This are important on all notional projects but would be absolutely vital on something like an M2 browning + 50 bmg replacement.

It's why when you asked me what I'd do, I picked both a gun and an ammunition approach that I know could be done for reasonable costs. As an example, the gun I'm basing my idea off of in it's original form would have cost the government somewhere between 20 and 25% as much per gun as a brand new M2 browning cost at the time. Once you factored in the fact that the replacement gun also had a massively reduced parts count, and that those parts themselves are much more suited to modern manufacturing, you wind up with a gun system that's "worth it" to replace the M2 with and helps to sell the added cost of developing the new full caliber or sabot rounds you'd pair with the gun for certain uses.

This is something that many people don't think about when it comes to weapons projects you in theory actually want the government to buy. 

It doesn't matter how cool your concept is or even what amazing stuff it can on paper do if it can't actually fit into the military organization you're intending it for and do the job you're aiming it towards doing.

My "replacement 50" thoughts and what solutions I picked were tailored first and foremost to being able to do all the same jobs the Browning M2 does in basically the same way (only much better and cheaper) because if whatever you're proposing is going to require a massive reorganization of men and materiel on top of making the new guns ammo and spares that's a much harder sale.

Technology and neat solutions aren't an end into themselves. The idea is to match the best solutions you can to the specific purposes and use cases you're aiming at.

This is why I came out extremely hard against any bastard child caseless 50 caliber replacement. Caseless ammunition and guns have to be ridiculously babied, lavishly maintained, inspected before every use, requires everyone involved with handling them and their ammo and their users to pay very close attention to the ammo and the gun system itself.

This is the polar opposite of how our military uses M2 Browning's and other 50 guns and ammo.

My only advice here is that rather than focusing on the neatest niche technical tricks, you should first attempt to understand what the military does with a given system now how they use it what they use it for and things like that. 

Another example from my solution. If you had asked me how I intend to make my solution do the job of the m3p high rof aviation M2 Browning's I could have given you an answer because I have already thought that our.


From: smg762


Ok but would your round retain the 13k lbs energy or increase it? 

And would the new gun be lighter than m2


From: roguetechie


It's safe to say that my round would increase the ME even when just firing saboted m8 API, with the notional big boy rounds specifically for the gun it'd definitely jump probably quite a bit higher.

To an extent though my proposed rounds especially for this gun will hit like a fucking dump truck loaded with cement even before you factor in the explosives in the rounds.

Onto the actual gun itself.

"My gun" is essentially based off this.

Which as you can see was 55 pounds to the Browning's 84. Once you factor in that this gun is dual selectable feed though and my fast googling shows a box of linked brass case 50bmg weighing about 32.5 pounds all up including box, your weapon mount would have about the same if not a little more weight on it if you just went directly with the dover devil herself.

My proposed idea including all the revisions and etc and especially including the lightweight cases links and quick change ammo boxes would actually get you to a net weight savings over an M2 + ammo + ammo box and mount even though you'd have more than 2x as much ammo physically loaded and ready to fire on the gun.

I haven't went through and done all the math on what everything would weigh exactly but even with the new full caliber high pressure rounds in the TV style neckless cases you should be at least weight neutral on a round for round basis.

Where the real savings would come in is on reduced recoil and other forces the mount would have to compensate for and some other things. There you're talking substantial weight and bulk savings!

My goal wasn't so much even to save weight though, weight savings are sorta incidental.

My goal here is to give them something that hits harder, needs less maintenance, is cheaper, is easier to adapt to modern mounts like remote weapons stations while still being able to use it on a tripod with butterfly triggers when needed.

Also some of the things I'd do to the gun design and construction would make for much easier tripod use including not having to sandbag the living shit out of your tripods.

The gun and ammo are only part of the picture. My goal here is to give them something that works better for what they actually do with these gun systems.


From: smg762


It sounds good and a logical improvement.

I still think that weight is inconsequential given that most roles are vehicular. Size of ammo is the real nut to crack.

I even wondered about squared rounds that come packaged in a cube drop the cube into some kind of device that feeds each round to the gun.

And again, an APFSDS with .22 steel projos would in theory allow a round almost as small as 338 but theres the sabot danger.