This is intended for people interested in the subject of military guns and their ammunition, with emphasis on automatic weapons.
Latest 7:04 by Apsyda
Latest 6:38 by schnuersi
Latest 6:11 by autogun
Latest 20-May by Apsyda
Latest 20-May by Farmplinker
Latest 20-May by ramosausust
Latest 20-May by Mr. T (MrT4)
Latest 19-May by schnuersi
Latest 18-May by TarheelYank
Latest 14-May by Farmplinker
Latest 14-May by autogun
Latest 13-May by Petrus_Optim
Latest 13-May by Mr. T (MrT4)
Latest 12-May by graylion
Latest 12-May by gatnerd
Latest 9-May by DavidPawley
Latest 9-May by taschoene
Latest 9-May by gatnerd
Latest 29-Apr by mpopenker
Latest 28-Apr by taschoene
Latest 28-Apr by autogun
Latest 24-Apr by taschoene
Latest 24-Apr by Mr. T (MrT4)
Latest 22-Apr by stancrist
Latest 22-Apr by gatnerd
Technically you can use compressed propellant in anything so long as you're using the right propellants.
Yes it's also compatible with High pressure though it's best to keep in mind that the higher you run your pressures the more similarity your cartridge has to a bomb if something goes wrong.
You definitely want to make sure that the guns action is rated to 25-50% more pressure than the peak pressure you want to run.
Going back to the safety aspect, if one had a TKB022 or steyr ACR with NGSW ammo, surely youd need a lot of steel round the chamber to protect from kabooms...
as for compressed powder, im surprised noone has tried to reduce 556 down to 5.7x28 size.
also the 4.6hk has 65k PSI as well.
I wonder if reverse feed guns like the PKM or boberg pistol could cope with ultra pressure ammo....in principle i mean
Somebody has, and it's been posted in this thread!
Gatnerd showed the Knox engineering design. I'll repost just so you see.
As far as needing "lots of steel"... Not really.
You need to use very good steels and well optimized bolt head designs or etc.
Yeh i saw that but the document implies that its using an advanced propellant....they didnt mention compressed propellant.
My new thought for reducing throat wear (most of my pet projects are very overbore) is to cut the barrel in half...the first 6 inches is separate from the rest and the user can do a quick change...
Its like a m249 quick change exept your only swapping out the throat.
The round itself is a .23 caliber FABRL which is only 42grains but has 4900fps. Hence the concerns with throat wear.
Apparently revolving chambers wouldnt help much so the only other approach is cool propellants
If your goal is to achieve very high MV, why not going for a conical adapter or a "Gerlich" conical tube?
If you mean a squeezebore adaptor, its likely to deform the bullet enough to affect accuracy.
The concept works as planned - use the .23 / .243 caliber to get a high ME....and then add a 43grain FABRL to allow your 5000fps
Velocity related wear is easier to solve but it really needs a cool propellant otherwise this round will eat away at the throat
What would be the approximate BC of this 43grn FABRL...assuming a .243 diameter?
Note that the shape is much more refined than the original fabrl - the ogive is actually slightly inverted inwards
You wouldn't want to do a "swappable barrel throat" think about all the supporting gun structure you'd need to build up around that in order to ensure precise alignment etc. That's a recipe for an unreasonably heavy gun.
Also as useful as 4900 fps would be, it's just kinda not worth taking it to that extreme In a full caliber bore rider projectile configuration.
If you're going to go to all the trouble to launch something that fast you might as well take it all the way and send something with a 10-25:1 length to diameter ratio and just figure out acceptable parasitic mass ratio sabots.