gatnerd

Military Guns and Ammunition

Hosted by gatnerd

This is intended for people interested in the subject of military guns and their ammunition, with emphasis on automatic weapons.

  • 3339
    MEMBERS
  • 189813
    MESSAGES
  • 13
    POSTS TODAY

Discussions

NGSW Phase 2 Consolidation and info   Small Arms <20mm

Started 30/8/19 by gatnerd; 505882 views.
gatnerd

From: gatnerd

17-May

EmericD said:

We are trying to explore all the technical possibilities available to enhance the 5.56 mm & 7.62 mm (lighter cases, advanced propellents, better bullets), then we will decide if "the juice worth the squeeze". Additionally, those results will "feed" a technology program run by the European Defense Agency (including governments and manufacturers), devoted to define and build "a better mousetrap".

Super cool, please keep us posted on the developments.

Have you figured out how to economically produce VLD lead free military projectiles? I recall you mentioning trying to produce a brass/steel core version?

autogun

From: autogun

17-May

Some more explanation concerning the 5.56mm FABRL:

The aim was to reduce the recoil of the contemporary 5.56mm ammunition to make the rifles more controllable in burst fire. To achieve this the bullet weight was reduced from 55 to 37 grains by making it from steel with a plastic core, yet the much improved FF meant that the BC remained the same. Little more than half the propellant was needed to match the muzzle velocity of the M193 so the cartridge case could be shortened to leave room for the long bullet, and the chamber pressure was so low (39,000 psi instead of 52,000) that the use of an aluminium case became feasible, leading to an overall reduction in cartridge weight of 50%. The trajectory remained the same, but the recoil impulse was reduced by 35% (equivalent to a reduction in free recoil energy of over 60%).

gatnerd

From: gatnerd

17-May

Thats a really impressive reduction in recoil. 

gatnerd

From: gatnerd

17-May

Some solid NGSW info:

https://www.thefirearmblog.com/blog/2022/05/16/us-army-shares-details-next-generation-squad-weapons/

The XM5 weighs 8.38 pounds and 9.84 with the suppressor. The XM250 weighs 13 pounds with a bipod and 14.5 with the suppressor.

Currently the XM5 basic combat load is seven, 20-round magazines, which weighs 9.8 pounds. For the XM250 the basic combat load is four 100-round pouches, at 27.1 pounds. For comparison: the M4 carbine combat load, which is seven 30-round magazines, weighs 7.4 pounds, and the M249 light machine gun combat load, which is three 200-round pouches, weighs 20.8 pounds.

The Army has also confirmed that the suppressed XM5 is 36 inches in overall length with a 13.5-inch barrel.

The XM250 has a 41.87-inch overall length (with suppressor) and a 17.5-inch barrel. The weapon’s stock is no longer side folding, reportedly due to Army length requirements, and the weapon is “not considered [to have] a quick-change barrel like the M249.”

gatnerd

From: gatnerd

17-May

Updated specs:

XM5

XM5 w/ Suppressor = 9.84lbs

20rd 6.8 Mag = 1.4lbs 

36" OAL with suppressor, 13.5" barrel 

XM250

XM250 w/ Suppressor = 14.5lbs

100rd pouch of 6.8 = 6.78lbs

41.87" oal with suppressor, 17.5" barrel

6.8 Ammo:

Based on 6.4oz/0.4lb for a 20rd Lancer Mag, and 1.4lb for a loaded 20rd mag, we get 20x6.8 = 1lb.

-->

22.68g per cartridge

BruhMomento

From: BruhMomento

17-May

+ 1.5 lb optic (probably idk)
+ 0.5 lb peq 15

gee that is one heavy loadout

roguetechie

From: roguetechie

17-May

5.56 fabrl Magnum sounds lovely

roguetechie

From: roguetechie

17-May

I think the optic is closer to 2 - 2.5 pounds.

The gun will definitely be heavy.

Hell even my 16" 5.56 gun with 34mm mount and large tube 1-8 plus bootleg peq15 alike is not light.

Is it workable?

Yeah sure, but when people are already going to slingster style padded slings to spread the load of their 5.56 rifles including me it definitely says that even fully kitted 5.56 m4a1's are probably heavier than is really ideal.

Could this change if guys weren't averaging 100+ pound individual combat load outs?

Probably.

Rifle and ammunition weight doesn't exist in a vacuum and I think that we're about to find this out in a big way.

stancrist

From: stancrist

17-May

EmericD said:

       stancrist said: No, you absolutely do not need another weapon. You only need another barrel, one that has the correct rifling twist for the bullet.

The US didn't adopted a "M16A1 with a new barrel", they adopted the M16A2, which is another rifle.

Yes, that is quite true.  However, the M16A2 does not just have a different rifling twist than the M16A1. 

The M16A2 differs from the M16A1 in that numerous changes/improvements  were made to the design.

- New buttstock

- New pistol grip

- New upper receiver w/new rear sight and case deflector

- New lower receiver w/3-rd burst control

- New barrel configuration

- New fore end

- New front sight post

- New flash suppressor

Except for the caliber, the M16A2 was an almost completely different rifle than the M16A1.

EmericD said:

It's plain and simple, the M16A1 can't fire the SS-109 ammo...so you can't consider that "it's just another loading".

You're wrong on both counts.

a.  Like M193, the SS109/M855 is "just another loading" of 5.56x45 ammo.

b.  The M16A1 can fire SS109/M855 ammo (but accuracy is unacceptable).

EmericD said:

       stancrist said: 5.56x45 is still 5.56x45, whether loaded with 55gr bullets or 62gr bullets (or any other weight).

The boxes you show are written ".223 Rem" and not 5.56x45 mm.

Yes, because -- like 5.56x45 -- .223 REM is .223 REM whether loaded with 55gr or 62gr bullets.

But if that minor detail is of such great importance to you, here are cartons labelled 5.56mm:

EmericD said:

       stancrist said: I did not say NATO adopted 5.56 "to please" the US. I said NATO adopted 5.56 because it was a standard US caliber. The only reason there was NATO interest in 5.56x45 was because the US had adopted and was using that cartridge. If 5.56 had never become a US standard caliber, it's extremely improbable that NATO would have wanted to adopt it.

As the US is the main driver behind NATO, and forced the initial adoption of the 7.62 x 51 mm (against the will of a significant number of NATO countries) in 1954, only to adopt the .223 Rem less than 10 years after (and without any considerations to other NATO countries), I think that it's not arguments, but self-fulfilling prophecy.

Call it "self-fulfilling prophecy" if you like, but the fact remains that the only reason 5.56x45 was adopted by NATO is because it was a US standard caliber.

The Belgians would never have developed the SS109 loading if 5.56mm had not been a US standard caliber.

stancrist

From: stancrist

17-May

roguetechie said:

Rifle and ammunition weight doesn't exist in a vacuum and I think that we're about to find this out in a big way.

It should prove interesting. 

I see they apparently dropped the original 210-round basic ammo load nonsense. 

That helps a little with soldier carry load, but at the expense of combat endurance.

TOP