This is intended for people interested in the subject of military guns and their ammunition, with emphasis on automatic weapons.
Latest 6:32 by RovingPedant
Latest 19/12/20 by autogun
Latest 5:45 by gatnerd
Latest 5:34 by gatnerd
Latest 24-Jan by roguetechie
Latest 22-Jan by Mr. T (MrT4)
Latest 21-Jan by mpopenker
Latest 19-Jan by Alpen25
Latest 19-Jan by gatnerd
Latest 16-Jan by gatnerd
Latest 16-Jan by smg762
Latest 16-Jan by BruhMomento
Latest 14-Jan by David Finkel(ish) (mahjong54)
Latest 11-Jan by gatnerd
Latest 10-Jan by mpopenker
Latest 5-Jan by stancrist
Latest 31-Dec by smg762
Latest 27-Dec by bradys555
Latest 26-Dec by smg762
Latest 25-Dec by poliorcetes
Latest 25-Dec by autogun
Mr. T (MrT4) said:
downside is recoil.
I've had a chance to fire GM-94 this summer, although with Flash-bang rounds rather than HE/FAE. Recoil was not that bad, and certainly more bearable than that of the RMB-93 12 gauge shotgun which served as a starting point for design of the 43mm GL.
It is also pretty accurate, even with iron sights. I was able to land my 1st shot right at the feet of the target at 200 m.
I see that South Africa has purchased 40 mm MV grenade rounds from Rheinmetall.
The South African Army initiated the project in 2016 with the aim of fielding a new grenade launcher and family of 40mm ammunition. Armscor, the nation’s arms procurement agency, approved the procurement plan in February 2018, subsequently overseeing testing and evaluation of the Milkor Y4 multi-shot weapon. This involved firing Rheinmetall Denel Munition’s less-lethal, low-velocity and medium-velocity ammunition. Particular emphasis was placed on speed and accuracy.
The South African Army procured more than 20,000 rounds of medium-velocity ammunition, including high explosive ammunition, high explosive dual-purpose ammunition, practice ammunition, practice tracer ammunition, red phosphorous smoke rounds and orange target marker ammunition.
Rheinmetall Denel Munition’s medium-velocity ammunition has a maximum range of 800 metres, exceeding conventional extended range low-velocity (LV) variants by up to 375 metres while delivering unparalleled accuracy. The company’s ammunition suite currently encompasses nine different MV variants, six of which formed part of this procurement package.
With Rheinmetall Denel Munitions’s handover, Rheinmetall has taken the first step as the leading maker of new 40mm medium-velocity (MV, ca. 100 m/s) ammunition. The company is currently expanding its MV product. It now includes the new generation of 40mm MV ammunition, which has a maximum effective range of 800 metres, doubling the gunners’s operational reach and providing a flatter trajectory for those crucial close-in, accurately placed shots MV ammunition is. Currently undergoing NATO qualification, Rheinmetall’s 40mm MV ammunition family will soon be available in service and practice versions. It can be used with the multi-shot grenade launchers Milkor US M32A1 and AV 140. Furthermore, Rheinmetall’s 40mm Magazine-Fed Grenade Launcher (MFGL) is currently under development.
Does anyone know of any other countries which have adopted 40mm MV?
Also, does anyone have any details or illustrations of the MFGL?
As long as they never have to go prone, I guess!
Thanks for the pics - I first saw a mock-up of this a decade or more ago. Looks as if it's made some progress.
I wonder how much of a problem it would be to make the magazine housing rotatable, so the mag could stick out from the side rather than downwards. Either that or the firer could lie on his side, or his back....
Refleks said...As long as they never have to go prone, I guess!
Is there such a thing as military-grade stilts that would allow short people (like me) to use it? :)
Box Magazine in 40mm doesn't seem practical. Even in 12gauge shotguns, they get huge really fas,and tubular mag seems to be prefered.
Rotary mag like on Chinese grenade launchers more compact option for huge 40mm or 35mm rounds.
As long as they never have to go prone, I guess!
I'm wondering how spare mags will be carried...
This would seem to be a useful time to take another look at Metal Storm.
The changes I envisage being needed to achieve this go in the following sequence:
1. Design a stand-alone shoulder gun without considering any UGL applications.
2. Switch from the LV to the new medium-velocity (MV) rounds (which MS is already working on). These double the maximum range to 800m, but more importantly halve the trajectory height and projectile flight time to any range, providing far greater practical accuracy.
3. The only downside with MV ammunition is the increased recoil, since the muzzle velocity is raised to 105-120 m/s. It has been calculated that a weapon firing MV ammunition should weigh at least 5 kg to reduce the recoil to a level which the average soldier will find tolerable. A typical conventional single-barrel 40mm LV launcher, with stock, weighs around 2.5 kg, give or take a bit.
4. If the weight needs to be doubled to cope with MV ammunition, then a virtue can be made from necessity by giving it two barrels. This would not only double the "magazine" capacity, it would provide the option of loading each barrel with different ammunition – say, HE in one barrel, shot or flechette rounds in the other for close-quarter fighting – with the choice between them being made at the flick of a switch.
5. Since there is no need to provide space for a reloading mechanism, there is no reason to provide a conventional stock or even a receiver. The weapon could simply consist of the two barrels (stacked one above the other), a combined breech mechanism and very short butt attached to the back end, and a skeleton framework clamped to the barrel, supporting Picatinny rails. The breech block could flip open sideways to permit reloading (and incidentally, unlike the 3GL, there would be no restriction on the length of the rounds which could be loaded). The back of the breechblock, which forms the butt, could either be thickly padded or if necessary fitted with an hydraulic recoil damper. This layout would save the weight of the stock and allow the barrels to be significantly longer while keeping the overall length of the weapon short. This would provide space for more than three rounds per barrel – at least four, and possibly up to six depending on weight considerations and possibly on the acceptable degree of variation in muzzle velocity.
6. Some other details: the Picatinny rails would include electrical contacts. This would mean that the pistol grip unit – which would include the trigger, safety, barrel selector and battery – could be attached anywhere on the underside rail to adjust the length of pull to the user's choice. The location of the forward handgrip/bipod, sights and cheek-piece could be similarly adjusted. The electrical contacts would also facilitate the addition of STK's air-burst system, using fuze setters on the muzzle.
7. Safety concerns about having the breech so close to the firer's head could be addressed not only by safety interlocks to prevent the gun from being fired unless the breech is securely locked, but also by fitting a Kevlar shield.
The potential advantages of such a weapon appear to be considerable. Compared with the obvious rivals – the six-shot revolver GLs – it would be far more compact, much faster-firing, have a larger ammunition capacity and would offer the instant availability of two different ammunition types. A tactical option, depending on the circumstances, could be to keep one barrel loaded and leave the other free to single-load specialised rounds such as flare, smoke, or video reconnaissance types. With the STK grenade range to choose from, it would be very cheap to pick any existing projectiles (including less-lethal types for riot control) and attach the MS propellant/gas seal unit to them. The use of shot projectiles – or the development of multiple flechette loadings – would provide a devastating close-quarter battle capability which, with at least eight rounds available, could make the carrying of a second weapon unnecessary. A heavy single-flechette round could also provide a useful long-range performance against body armour.