This is intended for people interested in the subject of military guns and their ammunition, with emphasis on automatic weapons.
Latest 15:17 by EmericD
Latest 11:40 by 17thfabn
Latest 19/12/20 by autogun
Latest 21-May by nincomp
Latest 21-May by Barnowlgreen
Latest 20-May by Apsyda
Latest 20-May by Farmplinker
Latest 20-May by ramosausust
Latest 20-May by Mr. T (MrT4)
Latest 19-May by schnuersi
Latest 14-May by Farmplinker
Latest 14-May by autogun
Latest 13-May by Petrus_Optim
Latest 13-May by Mr. T (MrT4)
Latest 12-May by graylion
Latest 12-May by gatnerd
Latest 9-May by DavidPawley
Latest 9-May by taschoene
Latest 9-May by gatnerd
Latest 29-Apr by mpopenker
Latest 28-Apr by taschoene
Latest 28-Apr by autogun
Latest 24-Apr by taschoene
Latest 24-Apr by Mr. T (MrT4)
Found a cleared one:
And a brief write up:A KICKIN' 40MM SYSTEM
The EX41 may be relevant; it used a 40mm grenade with a 150m/s velocity.
Thats 50% faster then the the 40x51 MV.
Just for history, the FN "High Impulse Weapon" is a spin-off of the Lacroix "Samourai Urban Weapon" launcher developped initially for the French Army.
The initial goal was to field a shoulder-fired weapon for urban combat that could launch a 1 kg warhead from the inside of a room with minimum signature (and no backblast).
A "hi-low" pressure system was used to propel the 1 kg / 76 mm warhead at a MV around 76 m/s, but the live (incendiary) round used a flammable liquid and the effects were not really spectacular.
These Chinese auto GL are all high velocity 40x53 for export. And we have seen these in action in Jemen and Iraq. But its 13kg unloaded, with the addition of Airburst kit weight grows 2.8kg further,
''This air-blast kit mainly includes OS23 simple fire control and muzzle fuze binding device. The weight of the kit is less than 2.8 kg, adopting a method of timing based on rotating number. The fire control calculates the number of rotations required for the grenade to fly above the target based on the results of laser ranging, and then binds it to the fuze. When the grenade flies to the bound number of rotations, it is located at the top of the target, and the fragment would hit the hidden target into a hornet’s nest.''
Airburst kit .
But even domestic 35mm version has quite a kick
PLA?? ??? ?? 11???????? China QLU-11 sniper grenade launcher - YouTube ...
Shaped Charge grenades for the NORINCO QLU-11/LG-5 sniper 40mm grenade launcher. https://thedeaddistrict.blogspot.com/2020/11/shaped-charge-grenades-for-qlu-...
Mr. T (MrT4) said:
These Chinese auto GL are all high velocity 40x53 for export. And we have seen these in action in Jemen and Iraq. But its 13kg unloaded, with the addition of Airburst kit weight grows 2.8kg further
Or just settle for 16 kg and go with the AGS 30?
I also remember long ago seeing a picture in a International defence Review of a 30x29B grenade launcher which was a salvaged AGS 17 barrel on a scaled up Ithaca shotgun made somewhere in central america. No one dared fire it but it looked rather like the China Lake Grenade launcher.
The Czech RAG-30 has been marketed for many years but I don't know if it's found any buyers.
Anyone has the chamber pressures for MV 40x46mm or is it 40x51mm?
In 40x46 mm LV, the "low pressure" chamber is around 20 MPa, and proof pressure is 23.5 MPa if I remember well.
A recoilless system springs to mind
Or maybe a modern day "PIAT" in 40x53 with airburst capabilities?
Might be a bit inaccurate due to the pre-shot-recoil, but at this modern day, counter-rotating gyroscopes should be a possibility.
Spin them up by touching the trigger, and brake them by releasing the trigger.