gatnerd

Military Guns and Ammunition

Hosted by gatnerd

This is intended for people interested in the subject of military guns and their ammunition, with emphasis on automatic weapons.

  • 3323
    MEMBERS
  • 188454
    MESSAGES
  • 0
    POSTS TODAY

Discussions

20x102 mm cannons   Army Guns 20+mm

Started 22/10/21 by Guardsman26; 6107 views.
gatnerd

From: gatnerd

25/10/21

Guardsman26 said:

Going back to my original post, the US Army is adopting Northrop Grumman's new SkyViper 20x102 mm cannon. What's interesting about this is that it'll be dual-feed with new AP and HE ammunition natures...If the collective view here is that 30x113 mm is superior, why is 20x102 mm being considered by the US Army in the FARA attack and reconnaissance helicopter and is choosing this calibre over 30x113 mm? 

The 'Sky Viper' is Northrops attempt to get in on the action. However the Army has been moving forward so far entirely with a 3 barrel Gatling gun called the XM915, which is appears to be a version of General Dynamics XM301 developed for the Commanche program (which was the previous failed FARA helicopter program.)

https://www.gd-ots.com/armaments/aircraft-guns-gun-systems/xm301/

Being a Gattling, it would likely not have a dual feed, and would just employ the standard 20mm HEI...at which point it would be inferior to 30x113 in penetration and grossly inferior in explosive fragmentation. 

So far its hard to tell why the Army wants a 20mm for FARA, given that they specifically went from 20mm to 30mm when they upgraded from the Cobra to the Apache. 

Possible explanations:

-Somehow 20mm rotary cannon outperforms the 30mm M230 (how we dont know and cant see)

--Weight is an absolute premium for the FARA, and the 80lb 20mm cannon + its slightly lighter ammo + its lower recoil (and therefore lighter mount) combine to produce a worthwhile weight savings for the aircraft. 

-The Army is relying on inertia for the FARA program and is simply re-hashing some of the specs used in the last 3 attempts to replace the Kiowa, the last being the Comanche which had the same lightweight 3 barrel 20mm. This seems cynical, yet the FARA program seems to have crept from scout helicopter to kick in the door peer enemy attack helicopter...little about this program makes that much sense.

....

The Army already had sketchy lethality with the 30mm on the Apache (prompting the development of airbust + enhanced frag) so its really hard to see how 20mm would be anything other than a downgrade for helicopter use.  

https://ndiastorage.blob.core.usgovcloudapi.net/ndia/2014/armaments/WedPaulHill.pdf

  • Edited 25 October 2021 6:05  by  gatnerd
stancrist

From: stancrist

25/10/21

Guardsman26 said:

Going back to my original post, the US Army is adopting Northrop Grumman's new SkyViper 20x102 mm cannon.

I also hear that they are looking at lightweight steel and polymer cases. In which case, Stan's observations about ammunition weight relative to 30x113 mm become otiose. 

My observations about ammo weight would become otiose only if and when steel case and/or polymer case 20x102mm ammo were actually developed, manufactured, adopted, and fielded. 

At present -- and for the foreseeable future -- my observation stands.  stuck_out_tongue_winking_eye

Guardsman26 said:

The existing 20x102 mm APDS round already has superior penetration to 12.7x99 mm BMG. The existing point detonation HE round is also good. In other words, could ammunition development transform this calibre and make it relevant to today, not only for mounting in aircraft, but also for armoured vehicles to engage infantry, other light vehicles and aerial targets? 

For aircraft, perhaps.  For armored vehicles, unlikely.

Guardsman26 said:

The question is what would 20x102 mm give you that 30x113 mm cannot? I think there are three potential advantages:

1. Kinetic armour penetration versus chemical effect of new APDS with tungsten and depleted uranium options 

2. Better performance against aerial targets due to higher velocity and higher rate of fire (crucial for engaging drones / UAVs)

3. More ammunition carried for the same weight than 30x113 mm

1.  Is the armor penetration of 20x102mm APDS sufficient to defeat threat light armored vehicles?

2.  No airburst ammo means a direct hit is necessary, so it is questionable that 20mm would perform better against drones and UAVs than 30mm airburst.

3.  I doubt that the Boxer vehicle would notice the slight difference in ammo weight.

Guardsman26 said:

The one advantage of 30x113 mm is its Proximity air burst ammunition. This has a lethal burst radius of around 3 metres. If it were possible to develop a 20x102 mm Prox round, I suspect the lethal burst radius would be 2 metres. This would not be as good, but might be enough to kill a drone, especially when fired in bursts of 5-10 rounds. 

I think you may be overly optimistic.  The fact that nobody makes 20x102mm airburst ammo seems like a good indication that it is not feasible.

Guardsman26 said:

If the collective view here is that 30x113 mm is superior, why is 20x102 mm being considered by the US Army?

The US Army is considering 20x102mm for scout helicopter armament

They have not considered arming IFVs with a 20mm cannon for ~50 years.

All things considered, fitting the Boxer with a 20mm gun as an "interim" weapon makes absolutely no sense to me.  I cannot imagine that the British Army would seriously entertain such a proposal.

poliorcetes

From: poliorcetes

25/10/21

If the vehicle is enough protected against a 30x113 HEDP, then it is enough valuable. And if it is enough valuable, it will be really more expensive than any ATGM or other future AT system like a loiter UAS.

I just don't understand why in 2021 AP capabilities of auto cannon is taken seriously anymore, given the myriad of AT options. I rather would think that payload capabilities, either cUAS, AP or in general urban fighting is more important by far.

And any 20mm lacks payload capability for using airburst ammunition and thus being a meaningful cUAS / antipersonnel in defilade system

gatnerd

From: gatnerd

25/10/21

poliorcetes said:

I just don't understand why in 2021 AP capabilities of auto cannon is taken seriously anymore, given the myriad of AT options. I rather would think that payload capabilities, either cUAS, AP or in general urban fighting is more important by far.

Autocannon AP ability may return to relevance if there is a proliferation of Active Protection Systems (APS) that make ATGMs unreliable. As far as we know APS doesn't work on screamingly fast APDS/APFDS. I could see that as part of the rationale for the 30x173mm Stryker, as well as the bigger AC's like the 40 CTA and 50-57mm developments the US and Russia are looking into.

But the sorts of vehicles that have APS that could defeat Javelins and other sophisticated ATGMS...more then likely armored well against Autocannons as well. At the least, almost certainly armored agains 'low end' AC's like 20x102. 

Overall as you said, for most realistic / useful light cannon applications (anti infantry, anti drone, anti structure, anti material) the 30mm is really the answer. Maximum HE, moderate recoil, with room for growth in both improving Frag as well as possibly improving the HEDP penetration through a more advanced little copper cone. 

In reply toRe: msg 27
gatnerd

From: gatnerd

25/10/21

In terms of .50's on RWS, is there any merit in switching from the M2 browning to the M3P version, which has 2x the ROF (1100rpm)?

To me this would seem a nice upgrade for the RWS, as it would allow a burst to put roughly 2x the amount of rounds on target in the amount of time as the M2, and the RWS would handle the recoil to ensure accuracy. 

That would seem to improve the chances of hitting moving infantry/vehicles, or having enough rounds hit an armored vehicle that one may disable an important sensor. All while keeping the same basic .50 setup and most of the same logistics.

Browning Fn M3M calibro .50

La prova a fuoco della mitragliatrice Fn M3M calibro .50, erede della leggendaria M2.

smg762

From: smg762

25/10/21

Whats the approximate core diameter of bog-standard .50 AP? (not SLAP) 

stancrist

From: stancrist

25/10/21

gatnerd said:

In terms of .50's on RWS, is there any merit in switching from the M2 browning to the M3P version, which has 2x the ROF (1100rpm)?

To me this would seem a nice upgrade for the RWS, as it would allow a burst to put roughly 2x the amount of rounds on target in the amount of time as the M2... 

That would seem to improve the chances of hitting moving infantry/vehicles... All while keeping the same basic .50 setup and most of the same logistics.

It sounds good in theory, but how much difference does it make in reality?

     M3 - https://youtu.be/gBcvKTYUFq8?t=19

     M2 - https://youtu.be/MWrthRBdhTA?t=1

Switching from the M2 to the M3 would have some significant drawbacks:

1.  It would consume ammo 2X as fast.

2.  It would burn up barrels 10X as fast.

3.  It would require buying a whole bunch of new manufactured M3 guns.

While FN would love the idea, I dunno if the gain would be worth the cost.

Farmplinker

From: Farmplinker

25/10/21

My understanding is that they are tired of having to retightening the bolts on the chopper after using the 30mm cannon. Less maintenance time.

gatnerd

From: gatnerd

26/10/21

Farmplinker said:

My understanding is that they are tired of having to retightening the bolts on the chopper after using the 30mm cannon. Less maintenance time.

That would be pretty weird, you'd imagine they'd have figured out some sort of Locktite like solution there in the last 40 years?

The Eurocopter Tiger uses a 30x113 GIAT, while Russia's MI28 and KA-52 use the even more beastly 30x165mm. I'd think at this point the 'copter mounted 30mm would be a non issue. 

smg762

From: smg762

26/10/21

Werent they considering the caseless Rmk30 for the tiger..

Can choppers use APDS or is it still too risky

TOP