Questions/POLLS/Mentors Topic -  image transfer on curved surface (226 views) Notify me whenever anyone posts in this discussion.Subscribe
From: Pat (TRICIART)9/10/16 12:38 PM 
To: amyfb  (3 of 5) 
 71344.3 in reply to 71344.2 

Thanks for your info.  You used a laser printer on what kind of paper?  I'm assuming you placed the print side down on unbaked clay and added water then smooshed the wet paper and the ink didn't blur?  Did you rub/burnish the back side of the paper first so that the image transferred before using the water?  I'm assuming I should transfer the image first on the flat clay and then curve it to bake it.   I'll try that but I just want to make sure I get all the instructions right before I try it. 

Thanks again,



 Reply   Options 

From: amyfb9/10/16 2:53 PM 
To: Pat (TRICIART)  (4 of 5) 
 71344.4 in reply to 71344.3 

Pat, I just used regular paper in my home laser printer. 

Olace the image ink side down on unbaked clay.

dip finger in water, gently rub into paper , pressing gently.

Repeat a few times, more or less as will begin to notice the paper changing  color as the ink releases.

Don't move the paper while doing it and 

allow to dry before removing paper.

if any paper sticks behind, gently moisten until it can be lightly rolled off.

test the difference for applying before and after the bending .

it might stretch during the bend. But maybe if you go slow enough it might not, or not too much.

good luck


From: Pat (TRICIART)9/11/16 11:15 AM 
To: amyfb  (5 of 5) 
 71344.5 in reply to 71344.4 

Thanks again,  will give it a try.



First Discussion>>

Navigate this discussion: 1-2 3-5
Adjust text size:

Welcome, guest! Get more out of Delphi Forums by logging in.

New to Delphi Forums? You can log in with your Facebook, Twitter, or Google account or use the New Member Login option and log in with any email address.

Home | Help | Forums | Chat | Blogs | Privacy Policy | Terms of Service
© Delphi Forums LLC All rights reserved.