Questions/POLLS/Mentors Topic -  What glue for tiles on wood that are... (917 views) Notify me whenever anyone posts in this discussion.Subscribe
From: aramina5 DelphiPlus Member Icon11/17/16 2:30 AM 
To: sunni (sunnisan)  (2 of 12) 
 71359.2 in reply to 71359.1 

I'd likely use an epoxy or gorilla glue because that is what I have on hand. Love to hear (and see) what you are making! One of the many projects on my vast list is an address plaque for the front I also would like to know what others have used.


 Reply   Options 

From: gilladian11/19/16 2:54 PM 
To: sunni (sunnisan)  (3 of 12) 
 71359.3 in reply to 71359.1 
I would use white caulk, such as is used for applying ceramic tiles to the wall.

From: sunni (sunnisan)11/30/16 10:04 PM 
To: All  (4 of 12) 
 71359.4 in reply to 71359.1 

Thank you, ladies!!! I'm on my second run after trying to mount tiles too large for the curvature of the branch. Sharp edges sticking out made the cane quite prickly. So I'm cutting them all MUCH tinier ad nauseum. I will DEFINITELY post once I get past all the downsizing of the tiles.


From: Ladyartist053/9/17 10:05 AM 
To: aramina5 DelphiPlus Member Icon unread  (5 of 12) 
 71359.5 in reply to 71359.2 

Good to know as this is on my project list as well.


From: Ladyartist053/9/17 10:06 AM 
To: sunni (sunnisan)  (6 of 12) 
 71359.6 in reply to 71359.4 

I am curious if you got this item mounted outside and if so how it is holding up?  Sun, winter weather etc?  Thanks, as I want to put one outside too.


From: sunni (sunnisan)4/17/17 7:00 PM 
To: Ladyartist05  (7 of 12) 
 71359.7 in reply to 71359.6 

i came to a halt on the cane. haven't touched it since I posted. It will be an all weather thing so after gluing it'll need to be sealed with marine grade water-based varathane. I'm fully confident the color will be maintained indefinitely.

back in 98/99 kelly robinson or mia (i think. i've slept since then.) did an experiment with Premo! clay. she made some "rocks" in different colors, used several different sealers and tossed them into her fishpond for a year. Some colors faded a wee bit, others didn't and the marine grade varathane was the winner.


From: Ladyartist054/19/17 12:25 PM 
To: sunni (sunnisan) unread  (8 of 12) 
 71359.8 in reply to 71359.7 

Thanks.   I like varathane too.  I don't really know if  mine is considered marine grade as a friend just gave me some in a container and I never saw the original can.


From: JNyagoMar-19 4:15 PM 
To: Ladyartist05  (9 of 12) 
 71359.9 in reply to 71359.8 

I love Varathane.  The glossy type I often use on pendants and buttons kept its shine through many sessions in the washing machine when I kept forgetting to remove a little brooch that makes the neckline on one of my dresses more modest.  Now I no longer bother to try to remember; if I do notice the brooch when preparing the laundry, I just pop that garment into one of those net bags.  But even that probably isn't necessary.


From: Ladyartist05Mar-20 1:41 PM 
To: JNyago  (10 of 12) 
 71359.10 in reply to 71359.9 

Cool!  Good to know, as I may not have washed anything yet, except my fitbit.  LOL


From: JNyagoMar-20 2:27 PM 
To: Ladyartist05  (11 of 12) 
 71359.11 in reply to 71359.10 

IMPORTANT STEP: I should have mentioned that for brooches, I not only stick the pin on the back of the brooch using Zap-a-Gap or some other instant glue, but also, after the glue sets, I use Kato Polypaste to apply a thin piece of suitably-colored clay over both the base of the pin and a bit of the back of the brooch on both sides of the pin, pushing it a bit into the three holes (in the case of the kind of pin backs I get from FireMountain Gems) on the flat part of the metal pin, and then bake once more.   After which I apply the Varathane.  Having spent enough time trying to get the photo onto the clay (often some pieces have to be discarded), I never want to lose a brooch just because the pin on the back has become detached.  The Polypaste is necessary, because without special help, it is impossible to bake a piece of raw clay onto a piece of clay that has already been baked, and I believe most glues cannot be trusted to hold well under baking, hence my addition of a new piece of clay to be baked on.  Kato Liquid Polymer Clay will work for this purpose with some things that do not get any stress, but I would not trust anything but the much thicker Polypaste to hold the pin on a brooch.  I got this idea from someone else's post somewhere--most likely not here--and I wish I could remember who, so that I could give them credit.


Navigate this discussion: 1 2-11 12
Adjust text size:

Welcome, guest! Get more out of Delphi Forums by logging in.

New to Delphi Forums? You can log in with your Facebook, Twitter, or Google account or use the New Member Login option and log in with any email address.

Home | Help | Forums | Chat | Blogs | Privacy Policy | Terms of Service
© Delphi Forums LLC All rights reserved.