BreakRoom/Almost Anything Goes -  Bangle Bracelet Forms (1381 views) Notify me whenever anyone posts in this discussion.Subscribe
From: klcrist2/22/13 1:33 PM 
To: manbeader DelphiPlus Member Icon  (4 of 44) 
 70313.4 in reply to 70313.1 

I have not used it yet but for the cuff I bought the metal mold from Premo - I bought it at the same store I buy my clay from. I am hoping to play with it soon. I actually bought two of them.


 Reply   Options 

From: manbeader DelphiPlus Member Icon2/22/13 7:55 PM 
To: Parymdk DelphiPlus Member Icon  (5 of 44) 
 70313.5 in reply to 70313.2 
Thanks for your feedback. Greg

From: manbeader DelphiPlus Member Icon2/22/13 7:57 PM 
To: alison528 unread  (6 of 44) 
 70313.6 in reply to 70313.3 
I have made a lot of cuffs and I have the metal bracelet blanks for those. Actually for odd shaped cuffs or different designs I cut my own blanks out of cheap aluminum and cover them.
I am looking specifically for forms to do Bangles and I cannot find anything except the soda can which is too flimsy for me to really work on after I get it wrapped around the can. I tried filling a soda can with cement but didn't do it properly and there were dents, oh the dents, lol.

From: manbeader DelphiPlus Member Icon2/22/13 7:58 PM 
To: alison528 unread  (7 of 44) 
 70313.7 in reply to 70313.3 
Oh and yes when you have time if you could find the bangle tutorial that would be awesome. I am a waiter and work weekends so I know what you mean by limited time. Thank you. Greg

From: bethcurran2/23/13 6:08 PM 
To: manbeader DelphiPlus Member Icon  (8 of 44) 
 70313.8 in reply to 70313.7 
What if you filled the soda can with sand, tapping the can down to pack it in tightly, and then sealed the hole qith duct tape?   or fill the can with plaster of Paris? - Beth

From: clayjay2/23/13 7:30 PM 
To: manbeader DelphiPlus Member Icon  (9 of 44) 
 70313.9 in reply to 70313.1 

Hi Greg,

I don't make bracelets/bangles, but I was trying think of something with the 2 1/2 inch diameter you wanted and still be sturdy/bakeable. What about a 2 1/2 inch round cookie/clay cutter? The one I have seems very sturdy. The bangle should slide right off. If not, put some foil on the cutter, then slide it off. Hope that helps. If you could find the right size small cutters, might work for the rings too.



  • Edited 2/23/2013 7:32 pm by clayjay

From: manbeader DelphiPlus Member Icon2/23/13 8:19 PM 
To: bethcurran  (10 of 44) 
 70313.10 in reply to 70313.8 
Awesome idea. This is why we need the brains of others when ours do not quite get it. Thank you.

From: manbeader DelphiPlus Member Icon2/23/13 8:21 PM 
To: clayjay  (11 of 44) 
 70313.11 in reply to 70313.9 
Another great idea. I have a lot of circle cutters in many sizes, I will measure the correct one then get some more of that size to do several at a time. And yes I also have the small ones and never thought of using them for rings. Perfect. Thanks all. Appreciate it.

From: clayjay2/24/13 12:10 AM 
To: manbeader DelphiPlus Member Icon  (12 of 44) 
 70313.12 in reply to 70313.11 

Let me know if it works. Might try it myself.



From: SherryBinNH2/25/13 7:49 PM 
To: manbeader DelphiPlus Member Icon  (13 of 44) 
 70313.13 in reply to 70313.1 

Another source is

I've gotten channel bangles fromthere (where you leave the clayon the metal) but I think they also have some you could use as forms.

Sherry Bailey


Navigate this discussion: 1-3 4-13 14-23 24-33 34-43 44
Adjust text size:

Welcome, guest! Get more out of Delphi Forums by logging in.

New to Delphi Forums? You can log in with your Facebook, Twitter, or Google account or use the New Member Login option and log in with any email address.

Home | Help | Forums | Chat | Blogs | Privacy Policy | Terms of Service
© Delphi Forums LLC All rights reserved.