Questions/POLLS/Mentors Topic -  The Care and Feeding of Polymer canes (629 views) Notify me whenever anyone posts in this discussion.Subscribe
From: Leigh (SINCERELEIGH) DelphiPlus Member Icon6/3/16 10:04 PM 
To: Melody01  (4 of 17) 
 71302.4 in reply to 71302.2 

Hi anita,  Im a huge believer after about 5 years that it was a strange set of hapenstance that cused and my inability to tell someone  in a loud voice "Im doin a demo" every one come NOW.  Not me!!!  Also Im was almost always on medicayion that really mess me up. fortunately I don' have as much trouble with that plus I have a long time for preparation.  I have stuff written down alrealy <GGG>.


I even wrote the outline it already.  I think I'll be writing it out and if they think it might be good I can put it in Donna Kato's school or add some stuff and see ifn any one will buy it on my Etsy Page we'll see what happens..

 Reply   Options 

From: Leigh (SINCERELEIGH) DelphiPlus Member Icon6/3/16 10:12 PM 
To: aramina5 DelphiPlus Member Icon  (5 of 17) 
 71302.5 in reply to 71302.3 

Susan, I'm sure some of my phobiasn came into view when I did It But nI think my head is healing a lot more since I got into Clay, Im a little less wearing my tears on my shoulders. And Conn retytreat has alot of friends.  Im going to ask  people to bring canes they are afraid of using and Hope I can fix them for them.


Thank you for the kind words I'd Love to be the AmswerLady and see if any one can stump me with a question about anything but air brushing!!!!!


From: aramina5 DelphiPlus Member Icon6/4/16 3:24 AM 
To: Leigh (SINCERELEIGH) DelphiPlus Member Icon  (6 of 17) 
 71302.6 in reply to 71302.5 

I know absolutely nothing about air brushing so...I won't ask that :) But wonder if you think there is any hope of resurrecting a cane that is very it was new but got put into storage for 10 years and when I found it I'd swear it had been baked...but it wasn't. I had many canes with it that are usable still so I have no idea why that one got like it did. I will live a rich and full life if it's just unsalvageable...more curious what you think!



From: aramina5 DelphiPlus Member Icon6/4/16 3:27 AM 
To: Leigh (SINCERELEIGH) DelphiPlus Member Icon  (7 of 17) 
 71302.7 in reply to 71302.5 

Oh yeah...and I think maybe you need to find a volunteer to wave a large flag stating "Demo Starting Now...Follow me!!!" They can walk around the general area and draw the crowd for you :)


From: Melody016/7/16 8:21 AM 
To: Leigh (SINCERELEIGH) DelphiPlus Member Icon  (8 of 17) 
 71302.8 in reply to 71302.4 

Leigh, I think it sounds very exciting and an important subject that I've never really seen addressed in any depth. An "in person" demo (especially if participants brought their actual "elderly" canes) would be an added bonus.

Anita in AZ


From: Leigh (SINCERELEIGH) DelphiPlus Member Icon6/11/16 9:00 PM 
To: aramina5 DelphiPlus Member Icon  (9 of 17) 
 71302.9 in reply to 71302.6 

On that hard as a rock cane first thing you need to do is put some Diluent on it. Or baby oil and wrap it up with saranwrap, real tight and put it in a warm spot.  By the way what is the size of it. if its very big after a few days of wrapping it up in diluent open it up and wipe it off so it isnt too slippery, then put something down on the floor or very solid place and start slamming it down on the table or floor like you want to beat the crap out of it turning it each time. hold one end of it and thwapp it down hard do it for a while if it should start to reduce push it back  into its original size. it should start to get a little softer. if it doesnt seem like its doing anything, wipe it off and put more diluent on it and wrap it back in saranwrap, and make sure its like airtight and put it back in a warm dark place and wait a couple days.  If you keep doing that it should start to reduce or at least soften up. Dont let it move too much think of doing it slow so you dont get distortion in the cane. You can keep doing this until the cane feels more likely to reduce then continue to do what you want with it.  The most important thing is slamming it down the vibrations of the slamming goes right through the cane and helps it get some movement back in the clay!!  Let me know if you try it and how it works. Dont throw it out well just try something else{GG}.


From: Leigh (SINCERELEIGH) DelphiPlus Member Icon6/11/16 9:03 PM 
To: Melody01  (10 of 17) 
 71302.10 in reply to 71302.8 

Thanks Melody!!!  Im gonna see if they can put something in the papers they send before the retreat.  Thanks for the feedback it sure helps.


From: aramina5 DelphiPlus Member Icon6/12/16 2:41 AM 
To: Leigh (SINCERELEIGH) DelphiPlus Member Icon  (11 of 17) 
 71302.11 in reply to 71302.9 

I will dig it out of hiding and get it going tomorrow! Thank you!!!



From: Melody016/12/16 8:27 AM 
To: Leigh (SINCERELEIGH) DelphiPlus Member Icon  (12 of 17) 
 71302.12 in reply to 71302.9 

Leigh, Thanks for sharing the helpful info which I now have bookmarked for the future. I have a Monarch butterfly cane that is eventually going to need your procedure. I figured it was lost. Thanks to you, now knowing what I know, maybe not! I think your clinic sounds like it would be a wonderful addition to PC knowledge!


Anita in AZ

  • Edited June 12, 2016 8:28 am  by  Melody01

From: StarGazer (STARGAZERCA) DelphiPlus Member Icon Posted by host6/12/16 3:08 PM 
To: Leigh (SINCERELEIGH) DelphiPlus Member Icon  (13 of 17) 
 71302.13 in reply to 71302.1 

How about doing a 'combo' demo - one where you make something (perhaps a cane?) and then intersperse all of the care and feeding tips while your making the cane?  That way you might pull in all the folks who've been around awhile.  If they have canes that need to wake up, they've probably been doing this a bit...  just a thought...

  - providing FREE weekly Polymer Clay Chats & Demos for over 14 Years! 
My Photo Site


Navigate this discussion: 1-3 4-13 14-17
Adjust text size:
Using a mobile device? Switch to the Mobile Site.

Welcome, guest! Get more out of Delphi Forums by logging in.

New to Delphi Forums? You can log in with your Facebook, Twitter, or Google account or use the New Member Login option and log in with any email address.

Home | Help | Forums | Chat | Blogs | Advertising | Membership Plans
© Delphi Forums LLC All rights reserved. Privacy Policy. Terms of Service.