Polymer Clay Talk -  Liquid polymer clay (694 views) Notify me whenever anyone posts in this discussion.Subscribe
 
From: S.Greige (GrgeSRabaud)12/26/16 5:57 AM 
To: All  (1 of 14) 
 71369.1 

Hi there. I'm quite new to polymer clay art. 

I just wanted to know if i can use liquid clay ( like sculpey) to make miniture babies? .

My babies are not coming out very well out of my push silicone mold using clay.

I have tried many times , pushing it down , dusting my mold with cornstarch, letting it sit in the freezer for half an hour and it still doesn't  work for me.

  I have used airdry la premiere doll clay...

Thanks in advance for your advice ..

 
 Reply   Options 

 
From: Melody0112/26/16 9:13 AM 
To: S.Greige (GrgeSRabaud)  (2 of 14) 
 71369.2 in reply to 71369.1 

Hi S. , I'm sorry to read you are having problems with your silicone molds. Are your molds the kind of silicone that you can cure with the clay in them? If so, I have successfully used TLS in molds like that, but it seems like a lot of un-necessary work when they should work much more easily with regular polymer clay. It sounds like you are doing the right things for you molds and I am un-sure why you are having problems. So, I'd like to start with basics. You mentioned air dried clay so I'd just like to check to be sure you are asking about polymer clay, not air dry clay. Which brand of clay are you using? What brand are your molds?

Anita in AZ

http://www.etsy.com/shop/melodyodesigns/

http://www.melobeau.blogspot.com/

http://pinterest.com/anitalbrandon/

http://www.flickr.com/photos/melobeau/

http://www.facebook.com/MelodyODesigns/

 

 

 
From: S.Greige (GrgeSRabaud)12/26/16 4:18 PM 
To: Melody01  (3 of 14) 
 71369.3 in reply to 71369.2 

Thanks so much for your reply.  I bought the silicone push mold through ebay ,I can't remember the brand name to be honest . I will post a picture of it so you can have a clearer idea of what I am talking about ..

Regarding the clay used , there are two types . Boyle Air Drying Clay  and La Doll - La Poupee La Muneca Natural Stone Clay.

 

 
From: Melody0112/26/16 5:04 PM 
To: S.Greige (GrgeSRabaud)  (4 of 14) 
 71369.4 in reply to 71369.3 

'Regarding the clay used , there are two types . Boyle Air Drying Clay  and La Doll - La Poupee La Muneca Natural Stone Clay.'

Hi S., It looks to me that you are using air dry clay rather than the clay commonly called polymer clay (like brands PREMO, Fimo, Kato, Sculpey, etc......though Sculpey is not always recommended). This may be why you are having difficulty with your molds. I know nothing about air dry clay, other than they don't react like polymer clays (commonly called PC) and don't necessary work the same. The reason why I asked what brand of silicone mold you were using was because the maker of the mold might be able to tell you if/how use could be adapted with with air dry. I did find in my archive info on a several tutorials for making babies with PC. I can dig up the URL for you if it's something that interests you.

On a different  track, I do know that all molds are not created equal. Various brands have different minerals in them that react with certain polyclays. The silicone molds I make myself work fine with most brands of PC, but using them with Kato brand renders them unable to set up.....so other than the potential problem with using  air dry VS PC, I was wondering if you'd purchased other brands of molds and if you had the same problem with all of them.

We're primarily a community of polymer clay enthusiasts here and I don't know of anyone here with much expertise in air dries, but perhaps you'll still get a reply. The other thing I would recommend would be to search for an air dry clay newsgroup, perhaps something on FaceBook.

Hoping you are able to find an answer and if you should ever have a question about PC we'll try to help.

Anita in AZ

http://www.etsy.com/shop/melodyodesigns/

http://www.melobeau.blogspot.com/

http://pinterest.com/anitalbrandon/

http://www.flickr.com/photos/melobeau/

http://www.facebook.com/MelodyODesigns/

 

 
From: S.Greige (GrgeSRabaud)12/26/16 5:33 PM 
To: Melody01  (5 of 14) 
 71369.5 in reply to 71369.4 

thanks alot for your time . After your reply , i have a feeling it may be the mold i am using. Perhaps it's not the best quality ... 

I might look into purchasing the OOAK ones.  

You are right . The clays I am using seem quite porous.

 

 
From: Melody0112/26/16 7:58 PM 
To: S.Greige (GrgeSRabaud) unread  (6 of 14) 
 71369.6 in reply to 71369.5 

Hi S. Just one more thought......when you purchased the mold did they specify that it could be used with air dry clay? I keep thinking that maybe the directions/hints you've found to free a molded piece (like using cornstarch/freezing) might not have been intended for use with air dry. Maybe there are special different hints to use a mold with air dry that are different than using it with PC? When you find out what works for you it would be great if you could return and let us know.........so maybe we can help another better in the future.

Anita in AZ

http://www.etsy.com/shop/melodyodesigns/

http://www.melobeau.blogspot.com/

http://pinterest.com/anitalbrandon/

http://www.flickr.com/photos/melobeau/

http://www.facebook.com/MelodyODesigns/

 

 

 
From: BrickleBears1/8/17 8:26 AM 
To: Melody01  (7 of 14) 
 71369.7 in reply to 71369.4 

I was wondering if you could tell me why Sculpey is not recommended? What is wrong with it? I am planning on buying a Sculpey III 12 pack. Do you think that is a good product to start with? I saw another type of Sculpey called Bake Shop that is made for kids. Is that a softer clay, or is it poor quality?

 

 

 
From: amyfb1/8/17 12:57 PM 
To: BrickleBears  (8 of 14) 
 71369.8 in reply to 71369.7 

I am worried that there is a confusion between the different ways that each clay cures (becomes hard, dries out).

In your first post you supplied information about AIR DRY clays. 

This forum is about polymer clay that is not air dry, but is baked. Sculpey is a kind of polymer clay. It will not air dry.

I think before you can get good answers about the mold problems, it would help us to know what you are trying to accomplish for the kids. Do you need air dry clay? Can you answer that ?

 

 

 

 
From: BrickleBears1/8/17 1:40 PM 
To: amyfb  (9 of 14) 
 71369.9 in reply to 71369.8 

Hello -

I am afraid you have me confused with another member. I did not ask that question!

I asked about Sculpey, but I never mentioned air dry clay. That was someone else.

 

 
From: amyfb1/8/17 3:36 PM 
To: BrickleBears  (10 of 14) 
 71369.10 in reply to 71369.9 

AH, ok.

So , Sculpey III - here's my input for your consideration:

it's great starter clay because it is easy to work.

it's not so great details clay because it is soft and the colors can bleed. anything other than simple jellyroll or bullseye canes are pretty hard to get fancy.

It's soft and sometimes not as easy to clean up as premo or kato. but for starters for kids, its perfect and easy to condition for small hands.

 

 

 
Navigate this discussion: 1-10 11-14
Adjust text size:
Using a mobile device? Switch to the Mobile Site.

Welcome, guest! Get more out of Delphi Forums by logging in.

New to Delphi Forums? You can log in with your Facebook, Twitter, or Google account or use the New Member Login option and log in with any email address.

Home | Help | Forums | Chat | Blogs | Advertising | Membership Plans
© Delphi Forums LLC All rights reserved. Privacy Policy. Terms of Service.