Online Quilting Guild

Hosted by Janet Wickell (janma)|

Welcome to our free quilting forum, the Online Quilting Guild, where you can share ideas about quilting, swap fabrics and other projects, and chat with quilters worldwide.

  • 6140
  • 153520
  • 5


What size do you guys make your quilts?   General Discussion

Started Oct-10 by MelRN; 1257 views.
In reply toRe: msg 5

From: bornblesse2


Why hot?  Mine don’t shrink that much.  I wash quilts in cool with as little agitation as pos…. Mostly line dry or partial dry and then fluff with air or low heat.

hot water and high heat are hard on fibers.


From: MelRN


Always have. Get any bleeding done with. What SIZE?

In reply toRe: msg 7

From: Mishii


I usually do 80x80 or 80ish x 90 

In reply toRe: msg 1

What I've done in the past is measure the actual mattress including the drop on sides & bottom, the maximum I would want without touching the floor (typically about 6-8" from the floor).  That makes them a little long, but gives some room when someone is in the bed to move around while still staying covered (I am cold natured).  also I don't really like seeing the dust ruffle much.  I have also folded up the corner of the quilt so that it doesn' touch the floor on the corner and tacked it to keep it there with a couple of hand stitches.  You don't see the border that way, but keeps me from tripping/stepping on it as I go around the bed.  If you like to fold the quilt over the pillows (old school style) include that as well.

Really it all depends on what you want.  Since you are making it, you can make it custom exactly how you like it.  If you are making it for a gift, I just use the standard comforter sizes plus some extra to be generous.

In reply toRe: msg 1
CC (ccase5)

From: CC (ccase5)


I find i need at least a 15 inch drop on the sides. If i go 20 inches which is what i would prefer, my corners then drape on the floor. Tripping hazard! So i always watch that. or make curved corners!
CC (ccase5)

From: CC (ccase5)


Oh rats!!! I could have folded up the corners on my lovey too large purple bedspread!! I gave it away. sigh.

I like using a king-sized quilt on my queen bed.  I don't like using a dust ruffle at all.  A king gives me just the right length of "drop" for my queen bed, as I don't like the quilt to hang too close to the floor.  (I have a timed "night light" under the bed, like for short trips to the bathroom.)  But also, the adjustable bed that I bought last year is significantly taller than a "regular" bed, and I have to use a little step-stool to get into the bed without straining.  Yikes!  (I have stayed at hotels where it was difficult to get UP into the beds!)  So, I would need to measure very carefully to allow for height, and add even more inches to a "normal" king-sized quilt, if I wanted it to fall closer to the floor.  


From: latterberry


My bed at home is not all that tall.  I'm 5 ft and can sit down with my feet touching. I just got back from a road trip and each motel I stayed at had beds that I had to climb to get up on!.  Falling out could have caused some major damage.

I kind of wonder why they have gotten so tall.


From: judyinohio


Good question.

I joked with DH that it's a plot against the elderly who are getting shorter in their senior years.