_V Star 1100 Riders_

Hosted by Sick Mick* (quick_mick)|The V Star 1100 Wiki Knowledge Base

The Very Best Information Source for All Models of the V Star XVS 1100

  • 31560
  • 812727
  • 0


PODS and miscellaneous    Technical-Bikes

Started 2/28/21 by Ed (VeryNorCalEd); 2896 views.
Ed (VeryNorCalEd)

From: Ed (VeryNorCalEd)


Hey Ron wave,

sorry about the delayed reply grin Went back and checked my emails and the only unopened email I noticed from the forum that I had was from Don? I did not find an email notice of your response. I’m sure it was something I did or didn’t do to have missed it.

So made contact with Shane (SS) and Tim (Metric Magic) about POD kits and flushedCams. 
Cams, drop in, stock valve spring huge wake up!!!!

Yeah I’m doing itthumbsup

Shane doesn’t stock the Boss 429 cam anymore. Has to order 100 cams minimum and the cam sales slowed way down years ago so he can not justify tying up that much money. Totally understandable. Still has the SS Chubby under tank POD kits however.

Tim lost his wife with in the last year and closed the doors of Metric Magic. Not sure which happened first. Sorry for your loss brother.pray

Tim had a cool looking POD kit that brings the air filters out from under the tank and one option is polished copper elbows. My bike is black and root beer brown with pearl and I think a polished copper accent would look bitchen. I want sum.blush

Tim injured his hand recently and said that he would be willing to put together the “copper out from under the tank POD kit” after his hand heals and he has cams!!!!!!!!!!!! I do not know if Tim’s cams have a name like Shane’s (Boss 429) but if I’m correct Tim’s cams have a numerical Identity of “440.”

I am guessing Tim’s cams are similar to Shane’s cam profile and are drop in as well?

When I hear back from Tim we will get those MODS ordered up. Looking forward to that!!!!!!!!!

I have had a few warm days to test out my Memphis Shades fairing. I measured for it according to Memphis Shades instructions and the 5” windshield hit the mark.

After testing, fairing all the way forward and all the way back with a half helmet and sunglasses and a full face and visor as of right now the 5” is to short.

Below 55 it’s ok. At 65 mph the wind hitting my head starts to blur my vision. Above 80 it’s stupid, even with the full face. Duck down and the buffeting stops so anticipating this problem I ordered two windshields. I’ll be putting the 7” on next. More testing and results to come.


Side note;

if anyone is wanting to put a Memphis Shades Bat Wing Fairing on their 2004 V Star 1100 Classic and a Cobra Driving Lights light bar THEY BOTH FIT without any modifications or interference. I called Memphis Shades and Cobra and could not get a definitive answer. I also searched the internet. I was unable to find out if the two would work together. However I am referring to myself the self proclaimed tech moron so my guess is that anybody else will do a quick search and find the answer I toiled over and was unsuccessful in finding.stuck_out_tongue_winking_eye Also Shane at SS said he has sold the Cobra light bar for years and said it is totally fine to wire the driving lights according to the Cobra light bar instructions which is tapping into the blue wire running lights to stock light bar blinker running lights using the provided switch. I did just what Cobra said to and it works fine. Will probably re wire in the future to a handle bar switch with a relay, Shane at SS sells this switch as well. I wanted more space between my fairing and light bar so I could have full adjustment forward and back for airflow adjustment. I went to Ace Hardware with stock light bar screw in hand and bought 1/4” X 3/4” aluminum flat bar and longer screws to accommodate using three pieces of flat bar equaling 3/4” of spacer from stock light bar location. Laid out holes, drilled and polished the flat bar then re mounted light bar which gave me ample room between the backs of the driving lights and the fairing.

 Also if anyone is wanting to put on “Barons” pull back risers (BA-7410-U 1 1/2” pull back, 4” of rise over stock) on 2004 V Star 1100 Classic with stock bars and cables, they will work without replacing cables. Some re routing and handle bar mount adjusting will be necessary. It has been said that on later V Star models, Yamaha shortened their cables and brake line making it necessary to use aftermarket cables and brake line to fit without binding or pulling.


So, Ron or any other OG V Star Guru’s, is there a rev limiter on these bikes? I have only ridden it twice. The first time was up and down the coast in San Diego with my son on his metric cruiser and we cruised stop light to stop light, little town to little town never really letting her eat large volumes of air.

During my Memphis Shades wind tunnel testingstuck_out_tongue_winking_eye and doing some full pulls up to speed and beyond I hit what seemed to be a rev limiter? 
Or dirty mains? Or I missed a hose somewhere?

Very irritating. I have no tach and am not familiar with the 1100 power band but she was still pulling hard when power just fell off with the sound of a rev limiter.

I’m at 4200’ elevation so stock jetting would be rich if anything and it feels even, not like a miss from one main jet being clogged. Doesn’t seem lean or starved but maybe? I never messed with the floats when I rebuilt them because they sat for a long time. New fuel filter of course but it might be clogged again from left over gas crap. 7 years with gas in the tank and carbs. Worst gas varnish and gas jello I have ever seen.

Anyways searched the Knowledge Base, I’m there a lot these days 
...[Message truncated]
View Full Message
In reply toRe: msg 25
Ed (VeryNorCalEd)

From: Ed (VeryNorCalEd)


Not sure if a guy can edit a post so just wanted to make clear

”or in Texas (where) it’s 6 o’clock”

it reads “or in Texas here it’s 6 o’clock” which makes it sound like I’m in Texas, I’m not but my in-laws are in the hill country of Texas and can’t wait to take the Star there as well.thumbsup

what a difference a “W” makes grinjoy



From: gradie55


So Ed .. some answers ...yes to rev limiter its around 6200rpms .. with the Dyna 3000 you can change it to 7000. with cams .. mine is at 8000 pistons cams double valve springs.. 

Cams Tim's 440 sidewinder cams are equal to Shane's Boss 429. Donn and I tested are hearts out to see which one was better.  the final outcome= Equal 

Pods Dragon Breath pods are cool to look at ... Shanes Chubbies hide under the tank.. I feel that under the tank one responds better.. but that's just me.. 

full pulls... yup you hit the limiter.. you can fix it by purchasing a Dyna 3000...

with my dyno time I learnt that you want to be bang on with the jets always start with the smallest and work your way up.. a larger jet doesn't mean more power.. its the AFR 13.5 - 14.0 that produces good consistent power..  my set up on the coast 147.5 mains, 17.5 pilots, 2 shims on the needle for the front carb. 1 on the rear.. (was needed to balance out the carbs)  429 cams, Dyna set at curve 5  RPMs 7000 ... now you have all my secrets...

Border .. I'm on the northern border.. 500 ft to the NNE of the Danville Border guard house.. 

Ed (VeryNorCalEd)

From: Ed (VeryNorCalEd)


Ronyou rock,

you are the man!!!!! and an OG 1100 performance pioneer and thank you for willingly offering up information you paid so dearly for!!!!!!!!!

Seems like between you, Mick, Don, Shane, Tim you guys broke trail for those of us that have just showed up.

I am going to refer to myself as a blister that shows up after the work is done!!!!! Thank you to all you OG’s!!!!!!!! Trail Blazers

I am stoked that Shane and Tim’s cams from a dyno perspective are equal from a performance standpoint. Especially from a performance standpoint. It’s lucky for me Tim still has cams.

I would bet money on the “under tank” POD kits would have a better performance profile maybe even measurable on a dyno.

In my trade a 90 degree elbow added 10’ of resistance in calculating air flow for air conditioning. To much resistance (inches in mercury past .5”) would slow the air enough across the coil to ice it up. Slower air.

It looks to me that Tim’s set up is two 90’s to the carb as opposed to under-tank which looks like one 90? If so that would cause resistance. Physics is physics.

90’s create resistance period, buuuut I like the lookstuck_out_tongue_winking_eye everything is a trade off. 

I was doing some math today and a 2021 Electra Glide weighs 781 pounds and has 90 horse which in its stock configuration is 8.7 pounds per horse power.

My Star Classic weighs 599 pounds and has 62 horse power which is 9.6 pounds per horsepower.

Stock to stock riding experience light and nimble and similar performance would give the nod to the Star.

However when you do some simple and economical upgrades for the Star you go from 62 HP to 78 HP I think is what Shane from SS told me.astonished That takes a Star to a whole new riding experience level. 

Cruiser, light, nimble, higher RPM longer winded power band and 7.67 pounds per horsepower. Whoooooooooooa!!!!!!!!!

If a guy wanted to take that even farther a 2021 Electra Glide is $18000 conservatively with no upgrades. That’s $200 per horsepower for a lower RPM, heavier riding experience.

Not a fair comparison but I got like way far south of $5000 into my Star so far, like really $3500 and by the time I get done with the MODS you all pioneered maybe $5000 probably less.  That’s $64 per horsepower riding experience.

I’m OK with that, especially since I’m way poorer than our brothers that ride HD. Bottom line I like being in the wind and rode flat twin Beemers for a long time that’s 435 pounds and 1000 cc. Man we used to grind those valve covers off on the pavment.

Less aggressive riding style these days and trading a little performance for cool factor in my eyes is A OK with me, however I like to feel where the power drop off is and decided where I’m going to shift, I got to get a “Dyna 3000”, thanks for the info and tip. Man I hate that rev limiter. Yamaha did the same thing to my Rhino.grin Oh well I surely won’t hurt it trying to feel the seat of the pants powerband fall offstuck_out_tongue_winking_eye Remember Ed you want a Cruiser for cruising. I have a wrist problem.joy

I am terrible with direction, I have never been lost but I have been turned around for a few daysstuck_out_tongue_winking_eye 

So 500’ NNE of Danville Boarder crossing sounds like you just might reside in Canada? Looked the area up, absolutely gorgeous. The riding both sides of the border must be spectacular. You surely don’t get that much green without plenty of rain so good rain gear would be part of your every day riding kit or a towel for you and your bike.
...[Message truncated]
View Full Message
Donn (99Orton)

From: Donn (99Orton)


Ron, Mick and Myself can't take credit for the contents of the wKB, it was already developed when we arrived. Mick is now the keeper and does a fantastic job of keeping it updated. Ron did a kit that Shane offered at one time, it was the 502 kit. High compression pistons, heavy valve springs etc., I rode it once and even with the clutch slipping it was a rocket ship! 

      When I had my 1100 it would spank Softtails and I don't think there is any difference between exposed or under tank pods. Tim has exposed Pods on his bike and we run even. We have had several Meet and Greets over the years and have been able to meet and make lifelong friendships. A few of us are talking about getting together in June up near Eugene for a informal get together.

      When you do cams get a dyna and set it at curve 3 and 6950 rev limit and let it rip, hit the limiter and shift! Just follow the KB for tuning in your situation.


Ed (VeryNorCalEd)

From: Ed (VeryNorCalEd)


Donn great to hear from you

Rocketship nice!!!! Typical in performance mods, you are always chasing the weak link.

”I rode it once and even with the clutch slipping it was a rocketship.” I love it

Thank you Donn for the history and performance tips. Respect for the humility but you guys are all celebrities to me and if there is a link to the V Star 1100 Riders forum history I would love to read it.

I am a caregiver for my wife and we are getting her a new knee this month and as soon as the doctor says “go” for the other knee we will be doing it as well. If I may be so bold as to invite myself on the impromptu ride in June out of Eugene, the bow out factors would be wife’s condition and bikes condition but if the planets align, I would love to meet you all and go for a puttStill want to do the Redwoods with you too

Going to try something not sure if it’s going to work or if this thread is appropriate so edit at will. Taking Mick’s advice to stick with the whole learning how to do things on the forum by trying things I’m going to try to post a pic. If it works I might post some more. I just noticed what looks like a photo with an arrow down. I’m doing this on my phone and my old eyes are old and yes I have cheaters on lets see.


whooooaaaa it worked it was upside down but I even accidentally stumbled upon that fix as well. Patting myself on the back right now.

Oh yeah you can now refer to me as the “High Tech Very Nor Cal Ed”

I can post pics of the risers I mentioned, the spacers for the Cobra light bar if any of that might help others looking to do the same not sure if this thread would be the correct place?

Thanks again Donn


Donn (99Orton)

From: Donn (99Orton)


Cheaters...lol, I've worn triple vision lenses for over 25 years now and at 68 they aren't getting better.  If you do Face Book a few of us old guys are talking about a get together, everyone will be on their own for meals and a place to sleep. Probably won't be any 1100's there since a lot of us have moved on but that's ok.

Ed (VeryNorCalEd)

From: Ed (VeryNorCalEd)


Hey Donn, 

boy time ain’t waiting for nobody. Besides my arms getting to short for reading it also seems the ground is getting farther away and once I get down on the ground gravity seems to have increased because it’s way harder to get up off the ground.

Probably why I have been looking at bike lifts whether new or home made.

The other day when I was putting on the Baron’s “oil filter relocation” kit, I put my favorite piece of cardboard on the concrete floor of the shop, after some time getting prone on the ground to pull the oil drain plug, I finally get the drain plug pulled and made sure the oil was actually going in the drain pan I looked up at the front exhaust flange and then woke up disoriented and went back into the house, forgot what I was doing.

So I figure if I get a lift or build a lift I might get more done.

Getting old ain’t for the faint of heart but it’s a great excuse for getting stuff you wish had when you were younger.

You granted access to my wife’s FB account to “Yamaha V* 1100 Riders” and she has looked for any kind of details or beginning ideas of the Eugene ride in June and has not found anything. Not sure if you can do links in FB to her account to help her help me for the info of the ride?

Thanks Donn


Donn (99Orton)

From: Donn (99Orton)


I quess it wasn't that page.  lol   It was on Jim Strodas page