_V Star 1100 Riders_

Hosted by Sick Mick* (quick_mick)|The V Star 1100 Wiki Knowledge Base

The Very Best Information Source for All Models of the V Star XVS 1100

  • 31558
  • 812725
  • 0


Engine cuts out at 5000 RPMs   Tuning&Exhaust:99-05 non cal

Started 6/8/21 by Vadose; 3249 views.

From: gradie55


when you installed the pods ... you put the black vent line on the right side pointed forward .. has that fallen and not pointing forward anymore... that will cause that... and you should hear ticking from your valves if you don't .. recheck.. cause there probably too tight... and 157.5 with 17.5 pilots are perfect... for your ride.. 


From: Vadose


Thanks everyone for the suggestions! I think I am going to wait until Spring to diagnose the issue at hand. I am done taking  the carbs out for the year!   I will check the valve specs and check all rubber for leaks and take it from there in the Spring. The bike runs really good with the cams and re jet. Just a little stumble at high RPMs. I can live with that the rest of the riding season that is quickly coming to an end here in Ohio.

In reply toRe: msg 40

From: Vadose


One more thing. I still have the TPS connected  with  the Dyna ignition module. I will try a ride with it disconnected see if that helps with the cutting out at high RPMs.