233 messages in 61 discussions
Latest 11/29/17 by ATone29
432 messages in 112 discussions
Latest Jul-12 by Borske
Latest Jul-7 by MarkLaCombe
Latest Jun-26 by tubbsinc
159 messages in 52 discussions
Latest Jun-24 by Chooi Chooi (chooix2)
7762 messages in 1549 discussions
Latest Jun-22 by Wayne5272
I have a few cabinets and items like filler pull outs, that for whatever reason, the countertop and toe kick do not automatically cover. I can drag the countertop over them and I can add toekick to the piece but it won't span the distance to the next cabinet. Are there any ideas as to what maybe causing this?
First , I would make sure that there is no gap at all between items.
Second, I would make sure the height of the items is the same (for CT).
Then I would edit the CT or Kick and extend it to cover bases, fillers etc.
There are no gaps, they are the same height. I need to get it set in the catalog creation side so that the designer does not need to stretch the countertop or toe kick. 2020 told me to check the Shape3D but those all seem to be correct. I am wondering if it has anything to do with it being the shape created with the AC3D technique?
Make sure you have a SHapeFloorPlan. Also double-check your RooTClass code to ensure it's set as a Floor Item.
The RooTClass code is correct and is a floor item. I'm a little confused because the pull out filler was created with ACcess3D1 and 3D2 and then also has a SH3D, SHE, and SHFP. My understanding was that if you create an image with AC3D Technique then you wouldn't use SH3d etc. because those are for ATSH techniques, Is this not correct?
That worked! Thank you!! Would you share what the significance of this number to make it work?
Very simply put, if something doesn't work right on the floor plan, it's likely the RTC or the SHFP. So find a comparable cabinet that does work right and use those same values.