This is intended for people interested in the subject of military guns and their ammunition, with emphasis on automatic weapons.
Latest 4:16 by EmericD
Latest 27/10/20 by Farmplinker
Latest 4:08 by EmericD
Latest 2:07 by stancrist
Latest 20-Jan by roguetechie
Latest 20-Jan by DeltaKilo
Latest 19-Jan by Alpen25
Latest 19-Jan by gatnerd
Latest 16-Jan by gatnerd
Latest 16-Jan by smg762
Latest 16-Jan by BruhMomento
Latest 14-Jan by David Finkel(ish) (mahjong54)
Latest 11-Jan by gatnerd
Latest 10-Jan by mpopenker
Latest 5-Jan by stancrist
Latest 31-Dec by smg762
Latest 27-Dec by bradys555
Latest 26-Dec by smg762
Latest 25-Dec by poliorcetes
Latest 25-Dec by autogun
Latest 24-Dec by gatnerd
Latest 23-Dec by gatnerd
I think that was the French slipping through a bit.
What Emeric wrote is exactly what U.S. sources (like Hatcher's Notebook p. 23ff) say.
What is your view why the M1 was dropped and the M1906 (under the new name M2) re-introduced?
EmericD said: They reverted to the Mle1906 shape for the .30 M2 excatly because the M1 had too much range, and not enough drag... Huh???
I've already dealt with this in posts 49 and 51 in this thread.
The "complete" story as told by Col. Hatcher:
At this time we had on hand about two billion of the war-time .30-'06 cartridges, and as ammunition is perishable, the policy was to use up the oldest ammunition first, keeping the newer for war reserve.
Thus the shooters on Army, National Guard and Civilian rifle ranges had to use the old war time stuff, while wishing for the happy day to come when they could get some of the good new ammunition [the M1] to use.
Finally about 1936 that wished-for day arrived, and with it trouble of an unexpected sort. The new ammunition had so much longer range and carrying power that it began to shout beyond the
previous danger zones of the existing ranges. The National Guard Bureau then requested the War Department to make up some ammunition like the old 1906, to use on the restricted ranges, and the order was given to make up 10,000,000 rounds of it.
This short range ammunition was made as much like the 1906 as possible. It had a 150 grain flat base bullet, but the jacket was of course made of gilding metal instead of the old cupro-nickel. It was,
however, colored to look like the 1906 by the use of a stannic stain, so it could be de distinguished from the M 1. The ogive was of the same shape as the M 1, and differed a bit from the shape of the 1906, but the difference was so slight as to be imperceptible.
Some of this ammunition reached the Service Boards. which by now had lost all of the old World War I machine gunners who so keenly felt the inadequacy of our ammunition in 1918. Our soldiers liked the lessened recoil of the new ammunition. More rounds could be carried for the same weight, etc., so the suggestion was made and carried through that it should be substituted for the M 1. In 1940 this ammunition with some slight further changes, was standardized as Cartridge, Ball, Caliber .30 M 2.
Remember that Gal. MacArthur rejected the choice of the .276 Pedersen for the Garand M1 because of the existing stock of .30-06 Mle1906 ammo, a stock that was already depleted by the time the Garand M1 was standardized in 1936...
M2 is not the same thing as M1906. The only thing they share in common is the projectile shape and lead core. Everything else is different.
The MacArthur story is a little oversimplified. He carried over the recommendation of the Ordnance Board, which was convinced by the existence of the ZH-29 and T1 Garand that a .30 caliber selfloading rifle light enough to meet their requirements could in fact be developed. The .276 cal's raison d'etre was entirely to allow a semiautomatic rifle to be made light enough for service use (9.5 lbs or less). With it being shown by 1930 that .30 cal selfloaders this light were possible, the need for the .276 evaporated, along with the challenges it presented. Keep in mind, at this time the US had entered the Great Depression, so there was no money for anything, let alone to retool every weapon for this new caliber.
But the fact remains that the sole motivation behind the development of the M2 was the need to reduce the "Surface Danger Zone" of the ammo, compared with the M1...
Yes, they just miss the opportunity to reduce ammo weight by 25% and at the same time increase the hit probability by 50% at 600 m... nothing really important after all !