gatnerd

Military Guns and Ammunition

Hosted by gatnerd

This is intended for people interested in the subject of military guns and their ammunition, with emphasis on automatic weapons.

  • 3254
    MEMBERS
  • 184708
    MESSAGES
  • 0
    POSTS TODAY

Discussions

Domed Shoulder brass for improved performance    Ammunition <20mm

Started 1-Aug by gatnerd; 851 views.
Red7272

From: Red7272

1-Aug

Weatherby have been doing that for decades and claiming it is beneficial.  At the same time wildcatters have been blowing the cases out to almost straight with 40 degree shoulders to improve the case capacity. Hydraulic flow is about ensuring laminar versus turbulent flow. To what extent this happens in gun chambers where there is a restrictive plug in the barrel that will be making a mess of flow anyway is debatable.  Target shooters who are interested in both accuracy and velocity have come to the conclusion that below is the ideal case type. 

nincomp

From: nincomp

1-Aug

I seem to recall a cartridge with domed shoulders very similar to the .416 Warner roughly 15 years ago.  It was considerably smaller than .416, however.  Maybe for varmiting or benchrest shooting?   Hopefully someone else has a better memory. 

roguetechie

From: roguetechie

3-Aug

That's a pretty interesting way to try to make brass competitive with true velocity etc

Sten556

From: Sten556

9-Aug

Good luck getting a decent and easy to make and measure datum for the headspace.

Also on my FEA simulations of cartridge cases a conical shoulder was never the issue, however the joints between it and the neck and body are, but it can be easilly solved via generous radius and cadequate clearance between the case and chamber. The "flat# bit doesn't need to be big, just enough to have a reliable reference point.

TOP