863737 messages in 81277 discussions
Latest Dec-12 by THECOM
173686 messages in 18454 discussions
Latest Dec-14 by xSomeguyx
Latest Dec-4 by xSomeguyx
44863 messages in 4615 discussions
Latest Dec-7 by xSomeguyx
1040245 messages in 32519 discussions
Latest Dec-6 by THECOM
Thanks again for your reply.
I'll reconsider the amount of RAM. May be my mentality is not quite server oriented, I just think that putting in more than 8GB is too much for what I want the box to do - store and serve files for a few devices around the house.
For some reason, none of your links worked for me, so I have no idea about the motherboard and RAM modules that you wanted me to look at. I live in Canada so availability is not the same anyway. I chose the ASUSmotherboard because it is reasonably priced and available. The board seems to be a server grade board, which has the C236 chipset and supports Xenon processors.
Fricking add pass-thrus...
These bad boys: https://tinyurl.com/SeagateCheetah15K
I think the commentary on RAID 5 is correct; with BIG drives, rebuild time for a gigantic array is extensive, and is more prone to completely borking since you're taxing the other disks. I do think that it's overstated though; I've rebuilt RAID 6 arrays (same as RAID 5, but instead of one parity drive there are two) with 12 disks a number of times, and though it's not fast it does succeed. I'm a big fan of RAID 10 though, especially if you can sacrifice the disk space; the speed boost is real nice, especially when you're talking about writes.
The problem isn't the RAID5 itself. It's the size of the disks themselves vs the overall number of disks in the raid.
With a 12 disk RAID, you're spreading out your data MUCH further than you are with a 3 drive RAID. And with double-parity, you have more recovery chances.
With a 4TB drive, the URE rate is something like 10^14. This gives you an almost guaranteed error at 12.5TB (3 plus a bit) complete read cycles of the array.
Since your RAID is still, only 8TB, your chances of tripping a URE aren't terrible. The more drives you add, and the more parity stripes you add, the better your chances of not hitting a truly unrecoverable error.
But, with 6, 8 and even the newer 10+TB drives, your chances of tripping a URE are STILL only about 10^14 (some better drives are 10^15, giving you a bigger margin of safety).
Why are these figures not improving with the improvements in tech? Because the areal density of the drives keep going up.
So, essentially, they're the same mechanism, they're just cramming more into the same space.