Latest 9:24 AM by Dee in TX (DBRADFOR3)
Latest 12:21 AM by Judy (DJZMOM)
Latest Dec-5 by keddykat75
Latest Dec-5 by MelRN
Latest Nov-17 by Cathy (cacnurse1)
Latest Nov-16 by Pirate (PIRATE_SR)
Latest Nov-15 by latterberry
Latest Nov-14 by tuckyquilter
I've a couple charity quilts to finish. Then I'll post pictures. I've been making bags to be filled with needed items for the homeless. They take quite a while to do for as simple as they are but they are sturdy and will hopefully hold up. I've finished the ones I have promised, so back to quilts. Here's a picture of 2 of them. We had donated fabric to work with.
Unfinished at 12.5" and Finish at 12" in a quilt. But one could use whatever size you want. Smaller for say a baby quilt.. or using even larger HST to make it bigger, and faster too.
I make HST, 2 & 4 Patches as leader/enders so I always have blocks made to work with when I don't want to think to hard. LOL
Those are terrific. Well done..
After quite a number of customer quilts look what I finally got on the machine. This is the one I was piecing blocks for at the retreat. I found the perfect wide back fabric and there was just enough and no extra left on the bolt, like 3" on either side of the top....wow, ment to be. I got the first row of the top of the arcs quilted, next is the center of those arcs, another row of the bottom. Not crazy fancy over the top but definitely heirloom with the formal feathers. I have been fiddling with what to quilt on this for months and yesterday it all came together.
re machine binding, do you sew to the back then pull to the front? I started doing that several months ago and I am sold. Definitely easier then trying to glue on the back and make sure I catch the fold. Sometimes my stitch line on the back isn't perfectly straight but I can live with it. I've even stopped pinning it at all, if I get near the corner and see I'm going to have a join/seam hit right at the mitre, I just cut a little bit off and rejoin the seam so that it lands before the corner. Most of the time it doesn't happen - sure saves a lot of time that I used to spend trying to position the seams to avoid corners. On the 4 quilts I just bound I only had to do that once, tho other times I've had to do it a couple of times on a quilt. still easier than the whole gluing, pinning mess I used to do. I do wish I could figure out how to not "wooble" so much on the corners. those still look a bit less than ideal
that is lovely! Are you able to just stitch the feathers or will you need to mark them? makes me a bit nervous just looking at it....
WOW! I love this! What a perfect design for a DWR!
I've done my bindings that way for years. I rarely use pins to hold the binding to the quilt; I just hold the binding in place with my fingers. Having said that, I *do* use a pin or two ... plus a skillets... when it comes time to do the mitered corners.
Like you I use to glue, than I just stopped and glued the corners. When I remembered that sewing into the 45 degree angle would always give me the correct seam allowance I stopped glueing. Now I just stop about two inches from the corner fold the binding to get a 45 degree crease, marking it if I don't think I can see the fold line under the needle. No matter what size you seam allowance the 45 degree crease gives the correct spot to stop. Hoping this makes sense. I also use the open toe foot.