Online Quilting Guild

Hosted by Janet Wickell (janma)|

Welcome to our free quilting forum, the Online Quilting Guild, where you can share ideas about quilting, swap fabrics and other projects, and chat with quilters worldwide.

  • 6164
  • 157288
  • 4


What Are You Working On Now?   General Discussion

Started 11/19/17 by MarciainMD; 804311 views.

that is lovely!  Are you able to just stitch the feathers or will you need to mark them?  makes me a bit nervous just looking at it.... grin

Pirate (PIRATE_SR)

From: Pirate (PIRATE_SR)


WOW!  I love this!  What a perfect design for a DWR!

Pirate (PIRATE_SR)

From: Pirate (PIRATE_SR)


I've done my bindings that way for years.  I rarely use pins to hold the binding to the quilt; I just hold the binding in place with my fingers.  Having said that, I *do* use a pin or two ... plus a skillets... when it comes time to do the mitered corners. 


From: Midkid5


Like you I use to glue, than I just stopped and glued the corners.  When I remembered that sewing into the 45 degree angle would always give me the correct seam allowance I stopped glueing.  Now I just stop about two inches from the corner fold the binding to get a 45 degree crease, marking it if I don't think I can see the fold line under the needle.  No matter what size you seam allowance the 45 degree crease gives the correct spot to stop.  Hoping this makes sense.  I also use the open toe foot.


I have found a good thread path and am using 5 different rulers. The feathers are all freehand, I have done them so much I can do them in my sleep.

Thank you. I was resisting the circle wreath in the center bur after trying a million other things I drew it out and decided that if I do a swirl on the inside then I just needed to go around the outside. I am going to make a little paper template for the last 2 or 3 feathers so the join will be perfect. Feathers are still my favorite freehand shape to quilt. You can fill a space pretty fast and they are very forgiving if you do not try to make them perfect. As I keep saying,  be consistently inconsistent!

it was you guys here that convinced me to try the "back to front" method - now I'm a believer.  I've also started making the seam a tiny smidge smaller so that pulling it around to the front isn't such a wrestling match.  Also since most of my backings are fleece, I cannot iron them (it melts).  So I use my thumbnail to press that seam down on the back before I flip it over.

Another tip I found recently and I think I prefer it - don't press the binding in half before you sew.  Just fold it over as you sew.  Previously when I pressed I'd come across a place where it wasn't pressed exactly in half, then I felt like I was fighting with it as I folded.  Also as you wrap it around, the binding folds where it naturally should.  Given the geometry it is not exactly in half due to the width of the fabric itself.  I know you'll know what I mean with your mathematical mind.  If nothing else it saves the step of pressing & makes it easier to store.

I might try gluing the corners on the next one, just to see if that helps prevent the wobble on the back.  I think the wobble is caused by sewing over the pins in combination with the thickness of the folded fabric on the miter.

part of my problem is sewing black bindings.  no matter how bright the light it still feels like a guessing game.  I did use a chalk pencil to mark the edges this time and that did help a little.

re feathers - I know.  Practice make perfect......grin

Cathy (cacnurse1)

From: Cathy (cacnurse1)


For some reason, even though I put stacks of squares or triangles in front of me, I just can't get the rhythm of grabbing them between the pieces for the project I'm working on.  Oh, well.  When I need a mindless project, I usually grab my strips.  I seem to have enough of those to last forever and, of course, I keep making more.

Can't wait to see a picture of your finished quilt.